5 replies to this topic

[Red Star]

Alright after many searches using most common terms of my problem,I didn't find anything.
So heres the problem:

When I modded my longshot it worked fine,when I put it back together the right side of the bolt would pull back,the left side worked perfectly I've checked with my friends longshots and It seems to be a common problem.
I don't have a picture to help you guys but it looks like the hole on the slide has been drilled at a bit.
Any help is welcome.

-Red

[Icespartan 1114]

If I can understand what you are saying is that you can not pull back on the the bolt that is on the right side of the gun, This a very typical problem for longshot, I would suggest just taking the gun apart again and then put it back together, I did that on one of my old longshots and it work well, I think it was the postioning of the bolt and the sleds, thats just from expereince

[bartel]

If I'm reading this correctly, then the notches in the right side of the bolt sled are not lined up with the shell correctly. That happens almost every time I open up my LS, so I always have to re open it and reclose it.

[Red Star]

No No No...
The slide itself is the problem.
Heres the picture.

See how where the bolt goes into is bigger?

Trust me,I've taken this thing apart many times never misplaced an internal.


EDIT: Please tell me that this isn't normal. I'd hate to create a big deal over something thats defaulted on the gun.

Edited by Red Star, 15 August 2008 - 02:40 AM.

[Icespartan 1114]

No No No...
The slide itself is the problem.
Heres the picture.

See how where the bolt goes into is bigger?

Trust me,I've taken this thing apart many times never misplaced an internal.


EDIT: Please tell me that this isn't normal. I'd hate to create a big deal over something that's defaulted on the gun.

Sorry, But I Don't see What the Problem Could be, Looks normal to me, Some more Detailed Pictures Would Help

[Red Storm]

My Longshot has the same problem as Red Star's. The left bolt works fine but the right bolt doesn't work very well. It was working fine intill I took out the ARs and added a NF spring. I just can't seem to find the problem.