8 replies to this topic

[Ice Nine]

I opened my RF20 yesterday to remove the posts in the barells so I could shoot stefans, but now it won't fire at all. I didn't touch any of the other mecanisms, and I'm not sure what happened. Anyone?
Edit: I found the leak. It turns out that the little thing that splits the air into two seperate places wasn't in right.

Edited by Ice Nine, 22 December 2003 - 03:37 PM.

[cxwq]

Did you remove the entire pegs including the ring at the base?

If so, was range affected? Some have maintained that the ring is necessary for adequate seal.

Doesn't really matter for me because my RF20 mod will do away with the entire front half of the barrel assembly but I'm curious.

[Ice Nine]

I took out all the pegs by unscrewing the bottom of the turret. Once that was out, the pegs just fell to the floor. With stefans, I haven't measured, but I'm guessing that they get at least 30 feet. It'll definitly help me in a war: my only useful, modded weapons are a SM750 and a AT3K (Singled).

[Ice Nine]

Sorry about the double post, but now I'm having a different problem: The gun is stuck in single fire. Not that that's too much of a problem; it's better than being stuck in rapid fire.

Edited by Ice Nine, 23 December 2003 - 01:46 PM.

[undeadtom]

Did you put the little yellowknob on? It "uses", I guess is the word, one of the valves allowing air to go aroound in rapid fire otherwise, if not pressed down, it remains in single.

[Ice Nine]

'Course I put on the yellow knob! I wouldn't be that ignorant!

[undeadtom]

Well maybe it's a problem with the valve thingy, sorry if I've offended you.

[nerfdude101]

are you using micro stefans?

[Ice Nine]

I am. They're the only darts that fit that size barell.