10 replies to this topic

[ltvills]

After a long dormant time of trying to pass my highschool subjects i decided 2 continue with my side project
again.namely this was finding a useful way to use my rfr. I then found my dual tek10 and decided to integrate it with the rfr.
The solution to my problem was easy and quick but the final product impresses me and alot of my friends because of the improvement of it.
This gun has even become one of my favorite primary guns.

What i did was

1. Cut the handle of the Tech 10

*Optional step*
(trim of the excess plastic that sticks out when you cock the tek10)

2.mount it to the Modded rfr as a shot gun forgrip kinda thing

3.Reinforce it with electric tape

4. get wire and tie the 2 triggers together so that when you squeez the Rfr Trigger
the Tek 10 trigger gets pulled back aswell.

Final product!

team Tag!

boom!




Future improvements
Adding led lights and an assault flashlight to it!
just some cosmetic changes and getting a better paint job.

comments?

[Lt Stefan]

That's pretty cool. Ranges?

[Shadowblade]

That's pretty awesome!
Questions: 1) Are those stock guns? 2) What are the ranges? 3) Does the integration get in the way of the rfr's priming handle? 4) I can't really tell from the pics, but does the integration block the rfr's clip?

You know, you could make it a bolty with this mod. Cool paintjob as well.

[KingCosmo7]

nice mod. but personally I am not a big fan of the teck 10 / dart tag blaster intergration guns. they get in the way alot more then just a simple longshot front gun and are alot harder to keep on the gun with out it falling of.

[dsman195276]

Hmm, it's cool, but it kinda limits the RFR since you can't put a mag into it any more, just breach load it, but what ever. I would do this but my RFR broke.

[CrazyIvan VI]

nice mod. but personally I am not a big fan of the teck 10 / dart tag blaster intergration guns. they get in the way alot more then just a simple longshot front gun and are alot harder to keep on the gun with out it falling of.

Considering if you do it right, and use a more permanent solution, like epoxy the DTG blows the Longshot frontgun out of the water. Seeing as it gets a lot better than 20 feet.

[AssassinNF]

nice mod. but personally I am not a big fan of the teck 10 / dart tag blaster intergration guns. they get in the way alot more then just a simple longshot front gun and are alot harder to keep on the gun with out it falling of.

Considering if you do it right, and use a more permanent solution, like epoxy the DTG blows the Longshot frontgun out of the water. Seeing as it gets a lot better than 20 feet.

My LS frontgun hits 50'

...after I rebuilt it's internals and gave it a stronger spring... and a brass barrel...

[AJZ]

.

Edited by AJZ, 13 July 2014 - 06:04 PM.

[KingCosmo7]

nice mod. but personally I am not a big fan of the teck 10 / dart tag blaster intergration guns. they get in the way alot more then just a simple longshot front gun and are alot harder to keep on the gun with out it falling of.

Considering if you do it right, and use a more permanent solution, like epoxy the DTG blows the Longshot frontgun out of the water. Seeing as it gets a lot better than 20 feet.

But there is a lot more room to mess up with just integrating the front gun, and you don't need as an expensive solution. Also, most of the time I see any of those things, the bottom gun seems to be bending down a little.

[ltvills]

answers to your questions
no it dosent hamper you from cocking the gun

yes it does block the clip..

sadly
the rfr is basicly stock other than a spring change
the tek 10 is modded

range of the rfr is bout 50-60
the range of the tek 10 is 50-60

Single loading it makes it seam like a loser type kinda weapon
im trying to work on how to get the clip to fit in from the side
ill be doing it asap

[Llama Boy]

I like the idea but I would of mounted the Tec-10 to the side of the gun.