4 replies to this topic

[KingCosmo7]

ok, some people i know, and me my self have had their recons broken when they just did some simple mods (usually nothing more then AR removal and re-enforcing the stock spring with e-tape and wire) and the reason for that is that the spring goes AROUND the plunger chamber (or what ever you call it) instead of behind it like most other guns. so does anybody have any ideas how to make it less breakable other than not modding it to begin with? i was thinking of putting some foam cushioning in the back of the plunger chamber but IDK.

EDIT: oh ya, and i forgot to mention what part breaks off. the back of the plunger chamber just pops off. I tried to fix mine with something called bondo or something??? i forget what it was but it was designed to fix water pipes. but when ever i sand papered it down so that it would fit inside the gun, air would find a way to bust through it.

Edited by KingCosmo7, 07 August 2008 - 01:14 PM.

[NerfCrazy]

I have no ideas but please use proper capitalization and don't use aim talk.

[bobafan]

What part is broken?

[boisie]

If the issue is that your recon won't cock correctly, it's because of the e-tape. You probably used too much, and it got pushed up on the plunger tube. Just remove it, and use less next time.

[KingCosmo7]

If the issue is that your recon won't cock correctly, it's because of the e-tape. You probably used too much, and it got pushed up on the plunger tube. Just remove it, and use less next time.

no, the back of the plunger chamber breaks off

What part is broken?

the back of the plunge chamber breaks off.

What part is broken?

the back of the plunger chamber