2 replies to this topic

[jackster57]

The other day I picked up a "SpiderMan 3 nerf dart tag blaster at TRU for 12 bucks. I Immedetly modded one with brass barrels. The first day it was working pretty good and getting about 55 feet. The next day my friends and I were having a small war in a nearby park and I decided to bring my new smdtg's along to accompony my maxshot. At first they were working about the same and getting about 45 feet. But Then I noticed that every about 10th shot the darts would fire >30 feet. As the day progressed the problems got worse, until I was misfirng about every 3 shots. When I got home I checked for leaks by submerging the blaster in water, I found None. Then just to be sure I opened it up , rechecked and then hotglued around of all the valves and barrels. But sure enough the first time I tested It I was dissapointed with 30 foot or less ranges. These guns seem to have potential , but I need to find out whats wrong. Any help Is appreaciated.

Edit- I modded the other one with AR removeal and am having a simlar problem.

Also all ranged are with the included stock taggers.


Please contibute your help.

Jackster57

[AssassinNF]

Out of the box, mine couldn't even push a dart out of the barrel. After I brassed it, it only got 2 ft. Your lucky yours even fires...

[dsman195276]

Out of the box, mine couldn't even push a dart out of the barrel. After I brassed it, it only got 2 ft. Your lucky yours even fires...

now that sounds promising...

[/joke]

um, is the air diverted through all three barrels? if so, it could be that you are using one barrel and most of the air escapes through the other ones.