Titan Mod Idea
#1
Posted 30 July 2008 - 11:04 AM
#2
Posted 30 July 2008 - 11:55 AM
Edited by nisaburo, 30 July 2008 - 11:58 AM.
#4
Posted 30 July 2008 - 12:56 PM
If you've got a titan laying around already then why not? It would work like 3DBBQ's pvc guns, using one larger tank to refill the smaller tank which fires the dart. If your gun has the space for it then give it a try.I think he means use the titan tank to refill the 2k tank.
#5
Posted 30 July 2008 - 12:56 PM
#6
Posted 30 July 2008 - 01:10 PM
Yes, with a ball valve this would work...sorta. There isn't much volume in a Titan air tank (compared to what you would need). You could probably get a few shots out of it, but each shot would greatly diminish in range. But, this isn't a terrible idea. Pump up your titan, fire off four AT2K shots (assuming you kept the turret on it) without having to repump (just working the valve). I think there are better ways to achieve the objective, but this could be a fun project to learn more about NERF blasters.I was thinking and what if you put a ball valve or other valve in between the two tanks (it would be on the tube in the main handle) it should work. You would have it open to fill the tanks and then close it to shoot the titan and open it again to shoot the at2k. also what is a check valve?
A check valve is a one-way valve. Air can go in but can't go back out. On your Titan pump and AT2K pump there is a check valve so that after you pump air into the tank it doesn't all come back out on the intake stroke.
Edit: Oh wait, I just re-read your post and it sounds like you just want an extra shot on your Titan. Yeah that will work just fine. If that's all you're trying to do then a check valve (or two depending on your preference) would be easier to operate. Just pump and fire, you wouldn't have to worry about opening or closing any valves, but a ball valve would still work. Open, pump, close, shoot, shoot. Good luck.
#7
Posted 30 July 2008 - 01:16 PM
#8
Posted 30 July 2008 - 03:04 PM
#9
Posted 30 July 2008 - 07:30 PM
If you've got a titan laying around already then why not? If your gun has the space for it then give it a try.
I hate idea posts.
If you have what you think is a good idea, do it and post your sucess. People will like you for a good idea but they will like you a whole buttload more if you have a good idea and surprise us/me with your write up.
And if you want help, Pm somebody you know is knowledgable and hopefully they will give you a calm response.
Edited by Renegademilitia15, 30 July 2008 - 07:30 PM.
FA_24's response to Ice's back pain thread:
I used to have that problem until I got circumcised. 15 pounds later I was able to stand up straight.
#10
Posted 30 July 2008 - 07:32 PM
Probably dead by now, or something.
#11
Posted 31 July 2008 - 01:52 AM
You don't need to add any extra hardware either since the checkvalve on the titan pump is already split. And you can cut out the crap from the A2K like the goo gauge and then just epoxy a hose barb into the back of the 2k.
I'd not plug the pump however. since that will help from blowing up the 2k while trying to fill the titan tank.
Edited by Blacksunshine, 31 July 2008 - 01:55 AM.
#12
Posted 31 July 2008 - 10:10 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users