Hello everyone this is my second post on the haven. I ordered some petg from modman. I unfortunately am unable to find couplers so I came up with a new type of coupler. What you do is take cresline pvc. It is pvc that is used the same purpose as cpvc. but has the size and color of pvc. So you do a standard barrel replacement with the cresline pvc make it about 5 to 6in minimum. then you wrap 3 rings of electrical tape around the petg 3 times. I've al ready done this to one of nite finders and my disk shot gun. The best part is the cresline pvc works well with stock darts or megas and the the petg shots stefans and streamlines very vell.
1 reply to this topic
Posted 30 July 2008 - 09:59 AM
Normally what people do, is take the PETG and put two too three wraps of e-tape on it. Then put the PETG in some 1/2 inch PVC and then your coupler is a PVC coupler.
I guess you have some heavy duty industrial strength toilet paper holders. Do they advise you to wear eye protection when changing rolls?
My TTG mod.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users