I don't like searching the whole thread to see if this was mentioned, but a much better fix for the T issue is to use a T and some CPVC in the T. Just put some goop on one end of the piece of CPVC, inside and out, then shove some FBR down it, and then goop the outside end. It worked great for me at the winter OH war, until it worked too well, and th e-tape got stuck in the T. I got that fixed though.
Ls That Funtions Well Without A Boltsled
Cause I was fucking sick of them breaking
Started by ice, Jul 26 2008 03:00 PM
83 replies to this topic
#76
boisie
-
- Members
- 303 posts
Member
Posted 27 December 2008 - 10:30 PM
QUOTE(One Man Clan) 
You understand what you just did posting a picture of 4 girls on a message board chock full of nerdy virgins, right?
QUOTE(Foamfoot)
Maybe if we download Ubuntu Christian edition, God will help us install it.
#77
Eboreg
-
- Banned
- 220 posts
Member
Posted 28 December 2008 - 03:12 PM
The thing to fix the air is epoxying a 1/2 inch cpvc cap and it would stay in.The only problem with a T is that air could escape out the
cockingI mean priming handle.
Could the mods please just lock this topic already?I don't like searching the whole thread to see if this was mentioned, but a much better fix for the T issue is to use a T and some CPVC in the T. Just put some goop on one end of the piece of CPVC, inside and out, then shove some FBR down it, and then goop the outside end. It worked great for me at the winter OH war, until it worked too well, and th e-tape got stuck in the T. I got that fixed though.
Always bring your sword to battle.
I pity the fool who attempts to use a single-shot blaster against me.
I pity the fool who attempts to use a single-shot blaster against me.
#78
canadiannerf
-
- Members
- 81 posts
Member
Posted 18 April 2009 - 06:21 PM
Would a T coupler work.
It would im guessing.... TO THE BASEMENT.
It would im guessing.... TO THE BASEMENT.
Plus, the regular cocking slide (Can't sig me now bitches! ) is much faster.
Muker
92% of teens would cry if Miley Cyrus was about to jump off a building.
If you are part of the 8% who would say "Jump B****, JUMP!!!!" . . .
Copy and paste this in your signature.
Muker
92% of teens would cry if Miley Cyrus was about to jump off a building.
If you are part of the 8% who would say "Jump B****, JUMP!!!!" . . .
Copy and paste this in your signature.
#79
BustaNinja
-
- Members
- 1,916 posts
Member
Posted 18 April 2009 - 06:33 PM
Would looking at the post dates work?Would a T coupler work.
It would im guessing.... TO THE BASEMENT.
to the NECRO!!!
Me: Yeah. he beat a hooker
Venom: Haven't we all?
Venom: Haven't we all?
#80
sonut18
-
- Members
- 1 posts
Member
Posted 28 June 2009 - 04:05 PM
Could you do this with a 3/4 to 1/2 cpvc coupler converter? I have a couple I never used in a previous mod and was wondering if I could use them for this instead of using a 1/2 cpvc coupler in 3/4 pvc as the part where the plunger head stops.
The world is moving so fast these days that the one who says it can't be done is generally interrupted by someone doing it.
-Harry Emerson Fosdick
-Harry Emerson Fosdick
#81
nightfinder
-
- Members
- 160 posts
Member
Posted 28 June 2009 - 09:47 PM
For gods sake SHUT UP. PM ice about it. Next person who posts will find a dead dog in their fridge in the morning.Could you do this with a 3/4 to 1/2 cpvc coupler converter? I have a couple I never used in a previous mod and was wondering if I could use them for this instead of using a 1/2 cpvc coupler in 3/4 pvc as the part where the plunger head stops.
NerfGrassHopper
QUOTE
R u gay ur sig makes it look so.. just lokin' for anotha gay nerfer...
#83
Dona Josefa Saurus
-
- Members
- 2 posts
Member
Posted 24 May 2010 - 10:34 AM
Just fill the handle with hot glue...The only problem with a T is that air could escape out the
cockingI mean priming handle.
#84
VACC
-
- Founders
- 3,265 posts
Vacc is Legend
Posted 24 May 2010 - 10:46 AM
:) my first reply!!!!!!
And your last, forever.
Just fill the handle with hot glue... :huh:The only problem with a T is that air could escape out the
cockingI mean priming handle.
3 months should give you enough time to get a clue.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
