5 replies to this topic

[Ginjiroku]

I am going to start building my first homemade this weekend. It is a modified version of the double ball valve on the site. And I am going to use the breech and where does the 1/2in coupler go It doesn't show it in the 3d diagram and the discription doesn't of where is goes doesn't make sience to me(Don't ask why). So could anyone that has made the breech show me a diagram of where this piece goes? I have an idea where but I am not really sure.

[Ginjiroku]

Forget this post

Edited by Ginjiroku, 19 December 2003 - 01:18 AM.

[Bobert]

I have an idea, but you came up with it! haha

[Bobert]

Sorry to double post, but you might want to send a message to zero. He made those diagrams.

[Ginjiroku]

i made a 5min diagram on paint of what I am talking about it is here
http://www.villageph...selected=675093

and do you even need the coupler? wouldn't it seal once the barrel goes all the way to the back of the larger 1in tube and past the breech hole?

Edited by Ginjiroku, 18 December 2003 - 09:44 PM.

[Alexthebeast]

The 1/2" PVC rests in the coupler for a seal. You put the dart in the slot through both layers of PVC, the turn the smaller layer to get a seal, and fire.