#1
Posted 14 July 2008 - 07:40 PM
#2
Posted 14 July 2008 - 08:28 PM
#3
Posted 14 July 2008 - 08:29 PM
#4
Posted 14 July 2008 - 08:40 PM
#5
Posted 14 July 2008 - 08:41 PM
#6
Posted 14 July 2008 - 09:10 PM
I just compared the tanks and the 3k is smaller. But almost the same size. I'm pretty sure that there are already write ups on this subject though...May I recommend the use of 1/2 in PEX tubing? The 3K's airtank is larger so you get better ranges. If you have any problems PM me.
#7
Posted 14 July 2008 - 09:15 PM
#8
Posted 14 July 2008 - 11:11 PM
Why does everyone talk about stuff they don't know about???
Just because the tank is bigger doesn't mean it gets better ranges.
The 3k releases more air, slower. So it gets lower ranges. The 2k release a short pop of some air, and very fast.
The titan releases a crapload of air, but slow. A Big blast release a lot of air fastly, and gets great range.
It all depends on the size to release ratio.
My CPVC "revolver mod" (Wrath's mod) gets 70ish feet with 6 inch barrels, but the foam fits nicely.
#9
Posted 14 July 2008 - 11:52 PM
#10
Posted 15 July 2008 - 09:39 AM
#11
Posted 15 July 2008 - 11:14 AM
Edited by Rouge warrior, 15 July 2008 - 11:16 AM.
#12
Posted 15 July 2008 - 08:41 PM
A bic pen mod is just replacing the spring on the firing pin with a generic pen cap/ body. All it really does is allow you to pull the pin back as soon as you pull the trigger instead of having to wait for the spring to fully compress. If you wanted to, you could cover the space with hot glue.
#13
Posted 16 July 2008 - 12:19 AM
-Chief
#14
Posted 16 July 2008 - 12:06 PM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users