Here is the SSPB in all its glory:( Or what little glory it has )
As you can see I have already done a barrel replacement. The barrel is one inch 17/32 brass nested in one and a half inches of OMC's PETG.
To start the mod open your SSPB and take it out of the shell. Now that its out, you see the little "x" on the top where the trigger was:
Sand it down until it reaches the lip of the circle. After that it should look like this:
There now your done. Here is what it looks like put back together:
The ranges I got with out doing this mod I got about 30'. With this mod I got about 31-32'.
It doesn't increase range to much, but gives it a few extra feet.
Sorry for the HUGE pictures, Photo Bucket isn't shrinking them down.
Edited by Dayko, 09 July 2008 - 08:26 PM.