#1
Posted 04 July 2008 - 11:42 AM
So is it the same way to make the LS shoot any dart. work wit the recon?
#2
Posted 04 July 2008 - 11:45 AM
It can actually shoot tagger darts and CDTS's.and im assumin like the LS it can only shoot those.
-A side of nerf
#3
Posted 04 July 2008 - 11:48 AM
yea didnt know wat cdts was.. looked it up. found my answer..
i <3 search.
Edited by philadel. Elite, 04 July 2008 - 11:51 AM.
#5
Posted 04 July 2008 - 11:58 AM
#6
Posted 04 July 2008 - 12:34 PM
So stephan's is a yes?
yea didnt know wat cdts was.. looked it up. found my answer..
i <3 search.
Fix your grammar Butthead.
FA_24's response to Ice's back pain thread:
I used to have that problem until I got circumcised. 15 pounds later I was able to stand up straight.
#7
Posted 04 July 2008 - 01:00 PM
Hey lay off him. You don't have to blow up at him, and you could have at least given him some advice. But anyway, my two cents is overwith. You have to modify the clip to shoot standart stefans. CDTD's are with the standart foam that fits in the breech, but it is the head on taggers that makes them jam. Stefans just fall down in the clip and jam, unless you do this mod, so it makes the clip compatible with standart stefans. But, you can't fire stock darts anymore.So stephan's is a yes?
yea didnt know wat cdts was.. looked it up. found my answer..
i <3 search.
Fix your grammar Butthead.
It's not like that. I put lube on it and its the same. Its just stuck. And when I cock it back it goes farther back then usual. Also I push as hard as I can and it wont go back in. I've tried the methods and they wont work. Also pics are up.
#8
Posted 04 July 2008 - 01:17 PM
thanks
#10
Posted 04 July 2008 - 02:05 PM
I already posted that link.
It's not like that. I put lube on it and its the same. Its just stuck. And when I cock it back it goes farther back then usual. Also I push as hard as I can and it wont go back in. I've tried the methods and they wont work. Also pics are up.
#11
Posted 04 July 2008 - 04:12 PM
I'd like to note for the new guy that A Side Of Nerf's first post was correct, but only in you pull the slide back and then forward and front load the dart. Also, stefans only work if the barrel post is removed.I already posted that link.
#12
Posted 04 July 2008 - 04:51 PM
I will spare my "2 cents" as long as the person asking spares me his common sense. And basic english skills.
P.S. the smiley probably wasn't necessary philadel. Elite. I am sorry. Forgive my critical spirit.
P.S.S. Bomberman: Correction: I didn't blow up at him, I stated that he should repair his post filled with bad grammar, if not a tad too harshly.
FA_24's response to Ice's back pain thread:
I used to have that problem until I got circumcised. 15 pounds later I was able to stand up straight.
#13
Posted 04 July 2008 - 05:09 PM
But you didn't so relax. I've been here long enough. take a chill pill.
Now to total war.
The barrel* post is the little orange piece that moves up and down right, the part when you cock the gun all the way forward it drops down. correct?
HEHE I said COD..
I was playing call of duty..
COC =D OOPS
Edited by philadel. Elite, 04 July 2008 - 05:31 PM.
#14
Posted 05 July 2008 - 01:37 PM
No, that's the dart tooth. If you look inside something else, say, a Nite Finder or a Maverick, you should see an orange peg about the length of the barrel. It's the thing that fits inside the hole in the back of stock darts. It's harder to see in the Recon but if you pull the slide back about halfway and look in through the clip slot you might see it.Well you know if you were to give me a warning, you would tell me to read the COD..
But you didn't so relax. I've been here long enough. take a chill pill.
Now to total war.
The barrel* post is the little orange piece that moves up and down right, the part when you cock the gun all the way forward it drops down. correct?
HEHE I said COD..
I was playing call of duty..
COC =D OOPS
#15
Posted 05 July 2008 - 03:04 PM
#16
Posted 05 July 2008 - 03:16 PM
#17
Posted 05 July 2008 - 05:53 PM
I'm modding the light as i type. I got a no-name pen blaster ss kinda thing. I need to do some dremeling and sanding ill post pics when ever i finish..
if i finish. ha
#18
Posted 05 July 2008 - 08:23 PM
Edited by Foam: Total War, 05 July 2008 - 08:24 PM.
#19
Posted 05 July 2008 - 09:53 PM
But then again, I wasn't doing it fast. So it would most likly jam up if I was.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users