6 replies to this topic

[pengynerfer]

Before i begin this, i want to acknowledge that this was an idea made off of CustonSnake202s "New Version Bbb Mod"

Okay.

You need an xacto knife, a crayola marker, a screwdriver, and masking tape (anda BBB)

First things first. take apart the front half of the gun.

Pull out the barrel (front part)

You should see the air restrictor. On mine it was glued together, but there are 4 parts, the orange tip, the little stick, the spring, and the "bottom thing"(with three holes in it)

Throw that entire thing away.

Put back together the gun.

Now look at the tip of the barrel. You should see 4 grooves. cut those out, then sand the entire front half inch of the barrel until a stock micro will fit in.

Now make a crayola barrel. Mine was a hair under 2 1/2 inches long.

Using 3/4 in masking tape, tape a few layers around the bottom of the barrel (whichever side has more crap in it)

It should fit snugly inside the stock barrel.

The gun can now fire stock micros well, and streamlines at least 70', almost certainly more.

And if, for some reason, you want to fire those crappy arrows, push the barrel all the way in. it is very easily ( with a pinkie) pulled out again.

This isn't as good as most other barrel replacements, but its quite good, due to the fact that you dont have to wait for epoxy to dry or anything. you could do this in a car, assuming you had those materials.

This is my first mod, so i would appreciate comments/questions

Pictures and ranges coming soon

And yes, you could do this as a "lazy boy mod".

[deaddumpster]

You know, you could've waited to post this so you could get the pictures up with it.

As far as I know, this has been done before. Regardless, good work, I really need to do something to my BBB.

[pengynerfer]

deaddumpster, on Jun 30 2008, 08:03 AM, said:

You know, you could've waited to post this so you could get the pictures up with it.

As far as I know, this has been done before. Regardless, good work, I really need to do something to my BBB.

my apologies. i couldnt take my BBB apart again, one of the screws was stripped, so i was waiting for permission to use pictures from another BBB mod of the insides.
range flat (tried to imitate Dylan's) was consistently over 65'(the length of my hallway) once i figured out how far to push in streamlines.

Dylan did something very similar, using brass and pvc, and suggested a crayola. mine was a writeup of how to do that suggestion, without sawing off part of the barrel.

also, i have to load the pictures on the work computer, which is the only one with the software for it. i may just settle for crappy pics from my laptop. ill post them soon

Edited by pengynerfer, 30 June 2008 - 08:17 AM.

[pengynerfer]

and yes someone has done a extremely similar mod. i just thought their instructions were confusing

[Tehmandude]

I'll try not to tear apart my house because someone copied my modification. ^^

[Renegademilitia15]

First of all, don't double post, it wastes space and looks corny. Secondly, search function is there for a reason, please use it. Otherwise, good mod. Pictures would help. Alot.
I respect easy mods because that was what my first mod offered too.

[pengynerfer]

sorry abbout the pictures the fricking computer wont let me get them on the web. srry if someone did this already,i saw a crayola barrel mod, but the barrel looked funny and the instructions were strange (no offense)