Well, one day I was going to show my friends my "modified" magstrike and the bladder blew up. I knew I had a spare and I opened up the gun to replace the bladder and I did. When I closed up the gun, everything was fine...until I shot it. Strangely the gun didn't fire, it was like a weird single shot gun that didn't shoot (e.g. the clip went up everytime I pulled the trigger). After a few minutes of tinkering, I loosened the screwes and spread the front of the gun apart, when I pulled the trigger it shot 4 bullets (with 20 pumps)...now the magstrike is usually like this and I can't get it to shoot (with a clip in) at all. Does anyone know how to fix this/has any experince with this type of problem?
Oh and if this helps at all...the gun feels harder to pump than with the old bladder, and the clip is hard to take out and push in.
EDIT: The green advancing rod thing still functions as it's supposed to, yet I don't think that's the problem as it does advance the clip, and I hot glued the little hole in the plunger tube to "increase the range"
Thanks,
--watari
Edited by Watari, 27 June 2008 - 12:35 PM.