![Posted Image](http://i280.photobucket.com/albums/kk193/Nerfcraft/DSC02916-1.jpg)
So first open the hard drive and extract all the goodies.
![Posted Image](http://i280.photobucket.com/albums/kk193/Nerfcraft/DSC02917-1.jpg)
This is what the magnet looks like.
![Posted Image](http://i280.photobucket.com/albums/kk193/Nerfcraft/DSC02920-1.jpg)
The magnet will be between two black peices of metal.
![Posted Image](http://i280.photobucket.com/albums/kk193/Nerfcraft/DSC02921-1.jpg)
Separate the pieces.
![Posted Image](http://i280.photobucket.com/albums/kk193/Nerfcraft/DSC02922-1.jpg)
The material for this part may vary. I used five ice cream tub lids for the "plate".
![Posted Image](http://i280.photobucket.com/albums/kk193/Nerfcraft/DSC02923-1.jpg)
Cut out five congruent squares.
![Posted Image](http://i280.photobucket.com/albums/kk193/Nerfcraft/DSC02931-1.jpg)
Attach them all together with zip ties.
![Posted Image](http://i280.photobucket.com/albums/kk193/Nerfcraft/DSC02932-1.jpg)
Trim the zip ties.
![Posted Image](http://i280.photobucket.com/albums/kk193/Nerfcraft/DSC02933-1.jpg)
Attach a piece of foam to the back of the panel for comfort.
![Posted Image](http://i280.photobucket.com/albums/kk193/Nerfcraft/DSC02926-1.jpg)
Attach the two black pieces of metal to the front of the panel.
![Posted Image](http://i280.photobucket.com/albums/kk193/Nerfcraft/DSC02927-1.jpg)
Fasten the magnet to the part of your gun that works best.
![Posted Image](http://i280.photobucket.com/albums/kk193/Nerfcraft/DSC02937-1.jpg)
The finished product looks like this.
![Posted Image](http://i280.photobucket.com/albums/kk193/Nerfcraft/DSC02929-1.jpg)
Slide the panel in your pocket and the gun attaches to the magnets. I don't know how well the connection is through thick denim. The maverick has somewhat of a good connection. I'm sure if it bumped into anything to hard it would fall off. So right now, this is a pistol holding system. (nitefinder, tech target, sneak shot, etc...)
If you have any questions feel free to comment.
-A side of nerf