My 3k has an odd problem: sometimes when I pump it just pumps the air straight out into the barrel instead of putting it into the airtank. Mods done to it: PEX barrel replacement, Pump plug, and goo gauge hole plugged so no air goes to the rubber membrane. any body know how to fix my mistake?
Airtech 3000 Problem
Started by Rogue Warrior, Jun 24 2008 04:33 PM
7 replies to this topic
#2
ChiliPepperFender
-
- Members
- 599 posts
Member
Posted 24 June 2008 - 04:42 PM
Oh no, are you the guy from NerfHQ with the poll asking about nerf or muscle? I hope not.
#3
umdlancer
-
- Members
- 119 posts
Member
Posted 24 June 2008 - 04:48 PM
It sounds to me like the chamber isn't closing properly after you fire a shot. Open it up and make sure that the valve release is seated on the trigger and supports, and that it's not catching on anything you might have inside the shell.
#4
analogkid
-
- Members
- 425 posts
Member
Posted 24 June 2008 - 07:56 PM
Haha, NerfHQ. Currently has a bandwidth exceeded error. 509'd bitch.
Anyways, check the seal on the trigger mech, lemme get you a picture.
Closed^
Open^
Make sure that is sealing properly.
Anyways, check the seal on the trigger mech, lemme get you a picture.
Closed^
Open^
Make sure that is sealing properly.
Edited by analogkid, 24 June 2008 - 07:56 PM.
#5
Rogue Warrior
-
- Members
- 320 posts
Member
Posted 25 June 2008 - 10:17 AM
Thanks guys I'll try it out today.
My GT is Spacecowboy9951
#6
Rogue Warrior
-
- Members
- 320 posts
Member
Posted 26 June 2008 - 10:13 AM
Ok it didn't work now what?
My GT is Spacecowboy9951
#8
Rogue Warrior
-
- Members
- 320 posts
Member
Posted 26 June 2008 - 03:16 PM
Well that answers my question.
end of thread
end of thread
My GT is Spacecowboy9951
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
