1 Night Finders
9 Inches CPVC (Add 8 inches for each extra speedloader you want)
4 Inches PETG (Alternative mod to CPVC)
1 CPVC coupler
1 1min-5min Epoxy (mix well) or hot glue
E-Tape (Optional for a different reason than usual)
1 #14 O-Ring
Pipe Cutters (Alternitive is saw of sorts Hack, scroll, etc.)
Something to mix epoxy with.
1. Open it up
2. Take out these pieces
3. Bore out the AR's:
4 and 5 will be explained in this video. (Don't do the barrel mod unless you want to ramrod.)
Ok at this point you have a good Nite Finder and can stop but the next part helps.
There are two barrel replacements I recomend Gengars and Ryans (www.FortNerf.com)
Ok I'll just let pics explain from here.
That's 4 inches of OMC PETG
1 inch of CPVC
Put the Coupler on.
Thats a speed loader on the gun.
Edited by Longshot Wielder, 09 June 2008 - 08:36 AM.