3 replies to this topic

[Kid Flash]

So... if I was doing imaseoulmans big blast/ big salvo integration where would I drill through on the airtank? does anyone have a picture?
a link to his:
http://nerfhaven.com...00&hl=big salvo
Or if I was doing one like Captain Slugs volley titan where would I drill through at? I couldnt find a close enough of a picture. Was it drilled through the back of the airtank?
a link to his:
http://nerfhaven.com...wtopic=8471&hl=
picture of where he says:

Thanks for everyones help.

Edited by Kid Flash, 01 June 2008 - 07:57 PM.

[angelof DEATH182]

1. Drill a small hole (1/8") in the rear of the Titan blast chamber.

rear of the Titan blast chamber.

Sorta self-explanatory.

[Vishamon]

A detail in imaseoulman's post that would be easy to miss if you weren't looking for it is where he specifies

-snip-
You're probably wondering how the pump is connected to the "Marvelous Salvo." If you're not, you should. I simply drilled a small hole in the Big Blast's air tank (on the big part between the three posts)
-snip-

I would say the hole is probably directly opposite the trigger pin, on the same side of the gap in the tank as the pump. A PM to imaseoulman may also help to clear things up. He might even have a picture he could share with you, ya never know!

[Kid Flash]

Alright. Thanks a bunch.