Jump to content


Photo

Marvelous Salvo


12 replies to this topic

#1 ChiliPepperFender

ChiliPepperFender

    Member

  • Members
  • 599 posts

Posted 25 May 2008 - 11:39 PM

Ok, I'd like to give all the credit to imaseolman's Marvelous Salvo, I'm pretty sure this can also work with hornet tanks also because of the way they are built. Anyway, if anyone needed a short easy way to do it with pictures, read this writeup.

First, get your Big Salvo:
Posted Image

Now open it up:
Posted Image

After that cut off 3 barrels leaving enough tubing so you can add tubing connectors/ barbed fittings:
Posted Image

Ok, now get you SMDTG:
Posted Image

Open it up and take out the internals. Cut off the orignal barrels as well as the pump. Again, leaving enough space for tubing connectors/ barbed fittings. Here's the SMDTG and the Big salvo internals:
Posted Image

Lastly, get a pump and tubing connectors/ barbed fittings. Pretty obvious on what to do from here, but here's a picture:
Posted Image

I used an AT2K pump, but I'm sure others would work. Once again thanks to imaseolman for thinking up this idea as well as answering a few questions a while back.

Questions, comments, flames?
  • 0
[The Blue Tiger][Manta Star]
WTS: Stock Crossbow. PM me if you have interest.

#2 PC III

PC III

    Member

  • Members
  • 389 posts

Posted 26 May 2008 - 12:12 AM

Nice. How many pumps does that take? Where did you get those connecters?
  • 0
QUOTE(ultra920 @ May 19 2008, 06:18 PM) View Post

Don't want to shove balls in tight spaces. Trust me, bad idea.

For sale: Vintage WWII French rifles. Dropped once, never fired.

#3 ChiliPepperFender

ChiliPepperFender

    Member

  • Members
  • 599 posts

Posted 26 May 2008 - 12:21 AM

It's an AT2K pump and I plugged it. It takes around 20 pumps untill it is hard to pump. I got the tubing connectors at Home Depot, they are 1/4"OD(1/8"CTS). I bought around 10 of them so I'm pretty much set.
  • 0
[The Blue Tiger][Manta Star]
WTS: Stock Crossbow. PM me if you have interest.

#4 PC III

PC III

    Member

  • Members
  • 389 posts

Posted 26 May 2008 - 12:25 AM

So you just screw them around the tubbing?

So you just screw them around the tubbing?
  • 0
QUOTE(ultra920 @ May 19 2008, 06:18 PM) View Post

Don't want to shove balls in tight spaces. Trust me, bad idea.

For sale: Vintage WWII French rifles. Dropped once, never fired.

#5 keef

keef

    Member

  • Members
  • 1,390 posts

Posted 26 May 2008 - 12:29 AM

They are $1.30 by me. Very high priced.

You just shove in the tubing and it works.

Nice job!
It works with hornets too, you just can't use the SMDTB pump.

Edited by keef, 26 May 2008 - 12:29 AM.

  • 0
Timothy M-Lick <3

#6 ChiliPepperFender

ChiliPepperFender

    Member

  • Members
  • 599 posts

Posted 26 May 2008 - 12:29 AM

So you just screw them around the tubbing?


The Big Salvo barrels? Yes.
  • 0
[The Blue Tiger][Manta Star]
WTS: Stock Crossbow. PM me if you have interest.

#7 Forsaken angel24

Forsaken angel24

    Member

  • Contributors
  • 2,472 posts

Posted 26 May 2008 - 01:13 AM

Killer integration material!
I will most likely be doing this in the future.
Are the ranges still similar to the big salvo with the smaller valve on there?

I don't even know where to classify this in the directory? Anyone got any ideas?

Edited by Forsaken_angel24, 26 May 2008 - 01:14 AM.

  • 0
I don't get my kicks out of you,
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.

#8 ChiliPepperFender

ChiliPepperFender

    Member

  • Members
  • 599 posts

Posted 26 May 2008 - 01:23 AM

Killer integration material!
I will most likely be doing this in the future.
Are the ranges still similar to the big salvo with the smaller valve on there?

I don't even know where to classify this in the directory? Anyone got any ideas?


Yeah, I'm still debating on wheather to put this on my crossbow or sawtooth. I've had this done for a while now but I haven't range tested. Again, imaseolman who made this, said that he was getting around the 100's in his thread. So I'm guessing I'd be getting around the same with PETG barrels.

For the directory thing, you could put it under integrations for both the Big Salvo and the SMDTG. Even though it's not actually another gun inside of another.

I just noticed, 3 writeups in 3 days! Expect that streak to end tommarow.

Edited by ChiliPepperFender, 26 May 2008 - 01:47 AM.

  • 0
[The Blue Tiger][Manta Star]
WTS: Stock Crossbow. PM me if you have interest.

#9 OfAllTheNerf

OfAllTheNerf

    Member

  • Members
  • 714 posts

Posted 26 May 2008 - 04:46 PM

Very nice. Like you aid imaseoulman made this already, but its always nice to have a writeup. Would you be willing to sell one of those connectors? I'll pm you.
  • 0
[color=#FF6600][Finesse]-[BitchX]

#10 Captain

Captain

    Member

  • Members
  • 814 posts

Posted 26 May 2008 - 05:21 PM

Wait, so is the object of this mod replacing the trigger with a more reliable one?
  • 0
I don't care what anyone else says, Atom Blasters are fucking awesome.

#11 PC III

PC III

    Member

  • Members
  • 389 posts

Posted 26 May 2008 - 05:43 PM

Mainly a smaller-more comftorble one, so yes. You loose a barrel though.
  • 0
QUOTE(ultra920 @ May 19 2008, 06:18 PM) View Post

Don't want to shove balls in tight spaces. Trust me, bad idea.

For sale: Vintage WWII French rifles. Dropped once, never fired.

#12 ChiliPepperFender

ChiliPepperFender

    Member

  • Members
  • 599 posts

Posted 26 May 2008 - 06:23 PM

Wait, so is the object of this mod replacing the trigger with a more reliable one?


That and making it very easy to integrate to anything.
  • 0
[The Blue Tiger][Manta Star]
WTS: Stock Crossbow. PM me if you have interest.

#13 Forsaken angel24

Forsaken angel24

    Member

  • Contributors
  • 2,472 posts

Posted 26 May 2008 - 11:35 PM

Listed as

::SMDTG combo Big Salvo dream integration.


Under Big Salvo and SMDTG.
  • 0
I don't get my kicks out of you,
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users