4 replies to this topic

[Magic]

Okay, this is my first write-up so cut me some slack. I was playing a local Nerf war with a few friends and I found one of my old micros. It didn't stick to anything anymore so it had no use. I decided to try something to make it fly farther and the outcome was amazing. Here is a write up on how to make micros fly farther.

Materials:
Micro dart
Hot glue gun with glue
Scissors

Okay so the first thing you want to do is get a micro dart.

Now you want to start to peal off the suction cup, but do it slowly or you will rip the dart.

After it's pealed it should look something like this.

Now pull out the suction slowly.

Now you want to take your scissors and begin to cut off the little nub on the opposite end of the suction.

After it's cut it should look like this.

Now take the little nub you cut off and stick it in the front end of the cleared out dart.

Put some hot glue on the end just to make sure it doesn't fall out. Don't worry, the glue won't burn the foam.

Now put a dab of hot glue on the end of the suction cup.

Now stick the suction cup on to the end of the dart with the nub in it and let it dry. Here is the final product.


Now that you have your darts made, go out, have fun, and let em' fly!

[BustaNinja]

Seems like alot of work. Instead, vut off the entire outside or the suction cup, put in a weight, and make a converted stefan.

But I have to applaud the ease of reading your write up. May not be the best, but you know how to do things.

Never seen you before. Welcome to the Haven

[Magic]

Hmm, thank you for the advice. By the way the ranges are about 15 to 20 ft. farther then a stock micro dart.

[BustaNinja]

Hmm, thank you for the advice. By the way the ranges are about 15 to 20 ft. farther then a stock micro dart.

In stock guns this would be helpful, as most stock guns don't have the power needed to propel a heavier dart as far, again, good job.

[Magic]

Thanks, by the way yes, I am a new member.

Edited by NerfOnFier, 04 June 2008 - 08:24 PM.