Then, take the stock orange barrels and just take them off.
Now, cut 3 pieces of 1/2" SCH 40 PVC, each 6" long.
And dremel the inside until it fits over the little nub on the tank.
Then you will have to take the black piece that slips over the barrels and dremel them out a little for the PVC to fit.
Do the same thing to the top hole in the shell.
Now put it all back together, which is probably the hardest part. The finished porduct:
Ranges, 50'-60', but with more pumps it could easily get in the 70'-80' range. The lowest was about 30', but that was due to a leaky barrel.
Edited by nerfer75, 26 April 2008 - 10:24 PM.