This is an explanation/mod about how to replace the stock barrel of a longshot with the barrel of the longshot extension barrel. The extension barrel is much larger than the stck barrel and you don't have to sacrifice all of the range of the longshot to have accuracy.
Longshot + extension barrel= less range & more accuracy
Longshot + extension barrel integration= balance of range and accuracy.
Disclaimer(I laugh out loud): This is for people who don't have access to cpvc/brass/pvc/etc.
I am explaining this as best as I can, as i have already done most of the mod already.
On to the mod.
Refer to this picture so you know what I am talking about.
Attach the chamber to the extension barrel.
Attached
Attach the dart tooth to the chamber
Attached
This is where it gets tricky. You are going to have to get the little piece of the dart tooth into the spring and then load everything into the shell of the longshot.
Here is a picture.
Close up of the spring and the dart tooth
That is it. just close up the shell and screw the screws in.
Here is a pic of Shorty's version of this, I think.
This isn't my longshot
I am sorry for the bad picture, they are because of the lighting in my room. I was also using my computers video camera or whatever it's called.
I also have no idea how to resize pictures.
Comments? Any suggestions.
Edited by 1lastnerfgun, 20 April 2008 - 07:48 PM.