13 replies to this topic

[ejrasmussen]

Well I was taking my own road of a magstrike mod and it didn't work out. Then i thought why not put an at3k in there? A ten shot at3k with clips?
Well here it is.


Internals


Damn goo gauge


In all it's glory!


EJ

[bogboogalars]

Does it still use the clip if so very clever...

[ejrasmussen]

Does it still use the clip if so very clever...

Indeed it does, and thank you.

[NerfCrazy]

What I want to know is how you attached the trigger to the firing pin. It would be even better if that pesky goo tube was gone. Overall, nice job.

[ejrasmussen]

I used a peice of plastic from a hangar and glued them together. Also thank you.

[Bomberman]

What in the hell?!

I like it. I think that you could have integrated a 3K into a lot of different things, but nevertheless, good job.

[nerfer9]

Does any one notice that it cannot lift the clip up by itself?The mechanism that lifts the clip is gone, so maybe you should cut a slot in the side and glue a piece of coat hanger so you can manually lift it.

[doubleshot]

Why not just buy an AT4k? Aren't those 10 shot?

[ejrasmussen]

Why not just buy an AT4k? Aren't those 10 shot?

Im preety sure they are a hell of a lot rarer than 3k's.

[mystefansdontflystraight]

Why not just buy an AT4k? Aren't those 10 shot?

AT4ks suck. Everyone agrees on this, and yes, they are quite rare. They are not very moddable, and no one uses them. They get bad ranges, I guess. Anyway, EJ, I would shorten the tubing ad cut out the Goo Gauge. Check out my BBB 3k integration to see what this looks like. That would improve it cosmetically, and it takes less pumps (mine takes 1.5) to fill the tank (pump not plugged). Just a suggestion...

[Blasphemy]

Why not just buy an AT4k? Aren't those 10 shot?

AT4ks suck. Everyone agrees on this, and yes, they are quite rare. They are not very moddable, and no one uses them. They get bad ranges, I guess.

Er...I don't think bags would agree on the fact that they suck, he has gotten fairly good results out of them before. AT4ks have a 12-shot turret, by the way. Also, you can remove that goo gage by cutting the tubing on both sides where it meets the goo gauge, then use a 1/4" barbed tubing coupler to connect the tubing.

[ejrasmussen]

Oh yeah I forgot to say that I cut a slot in the side to advance the clip. I'll try the goo gauge removal later when I can go to ace. Also it stopped working for some reason when I pump it with the gun open it works but when i close it the air just goes through theblast chamber.

EJ

[Silencer]

Very ingenius. I like how you still use the clip. Good job.

[ejrasmussen]

Thank you, Im glad that i'm only hirteen and making cool stuff. I fixed the problem please do not post about the problem I fixed it.

EJ

Edited by ejrasmussen, 14 April 2008 - 06:34 PM.