6 replies to this topic

[g-force]

You will need:
Dremel (or substitute pliers and a file like I did)
Spy gear signal launcher
Pen blaster (or adjust cuts to fit a pocket shot)

Step 1: open up your gun.

Step 2: draw this pattern onto the front of your gun.

You can either cut the cocking mech on your pen blaster and push the piece launching the dart forward back with a pencil or cut an opening to allow for you to cock it normally (this option will not allow you to fire stefans)You will also need to break of the pen segment.
Step 3: cut the design out.

(You may need to adjust your cutting a little.)
Step 4: Put your pen blaster in the gun so the trigger sticks out the slit on the side then hot glue it in place.


Step 5: Put your gun back together and hot glue around the edge of the pen blaster.

Now your done now go shoot some one. Here are some pictures of the finished product.



Coming soon! Integrating at2k and pocket shot. And adding 2k turret attachment to the primary barrel.
So what do all of you think?

Edited by g-force, 12 April 2008 - 02:10 PM.

[ChiliPepperFender]

Did you hot glue the gun shut? In the sixth picture it sort of looks like you did. Also why a pen blaster though, how far does it shoot? Nice creativity.

[keef]

I really like this mod. It looks really useful too.

Can you still write with it???

[Bomberman]

I like this mod, it is a creative integration. The pen blaster is overlooked so often. How large is the air tank on the Spy Gear Signal Launcher? I would really like to get one of these, and reocate the trigger. But kudos on the mod.

~Bomberman

P.S. I can't type very well, I just hit my fingernail in the sliding door in my van, and I have a splint on my middle finger. And I got a hole in my fingernail! (for the blood to drain through)

[Galaxy613]

IIRC the airtank is the same size as the Big Blast.

[Salmon]

Please resize the pics. They take up more or less the entire screen.

Otherwise, great job. If the tank on the SGSL(yay! new acronym!) is as big as a BBBB, then I might just have to go pick one up myself. I can't wait to see a 2K'd barrel on that sucker.

[g-force]

Did you hot glue the gun shut? In the sixth picture it sort of looks like you did. Also why a pen blaster though, how far does it shoot? Nice creativity.

The pen blaster fires 20 ft the spy gear gun fires 120 feet. I chose a pen blaster because I didn't have a pocket shot(. which I plan to integrate additionally) And i didn't hot glue it shut just around the edges of the pen blaster.