Will this work just like singling the reactor? just rip out the ball pusher and spring and shove a pipe with some foam noodle over it into the original barrel?
Trigger Fire Help
Started by Kid Flash, Apr 11 2008 06:09 PM
7 replies to this topic
#2
mystefansdontflystraight
-
- Members
- 1,176 posts
Member
Posted 11 April 2008 - 07:36 PM
Im not sure what gun you mean. I believe you mean the gun badger used to make his BOOMSTICK, right?
If so, I don't believe it will work. Try stuffing a piece of barrel down the hole for the AR like he did.
If so, I don't believe it will work. Try stuffing a piece of barrel down the hole for the AR like he did.
QUOTE(Blacksunshine @ Dec 24 2009, 02:15 PM) 
QUOTE(white moonlight @ Dec 23 2009, 01:29 PM)
It's just screaming to be rearloading...
I seen a movie about that once.
#3
keef
-
- Members
- 1,390 posts
Member
Posted 11 April 2008 - 07:39 PM
Don't post about stuff that your very uncertain of. It confuses people.
Depends. You can use the Ball barrel's AR like Badger did, or you could just glue a barrel in the plunger tube, or glue a coupler on it. Just MAKE sure you get the internals right. Hot gluing the springs helped me a LOT.
Depends. You can use the Ball barrel's AR like Badger did, or you could just glue a barrel in the plunger tube, or glue a coupler on it. Just MAKE sure you get the internals right. Hot gluing the springs helped me a LOT.
Timothy M-Lick <3
#4
Kid Flash
-
- Members
- 1,985 posts
Member
Posted 11 April 2008 - 07:48 PM
im talking not even opening it... just doing something like this...Don't post about stuff that your very uncertain of. It confuses people.
Depends. You can use the Ball barrel's AR like Badger did, or you could just glue a barrel in the plunger tube, or glue a coupler on it. Just MAKE sure you get the internals right. Hot gluing the springs helped me a LOT.
#5
keef
-
- Members
- 1,390 posts
Member
Posted 11 April 2008 - 08:31 PM
Nope. You have to open it up to do it.
If you just cut off the front, you will screw something up.
But, If you cut it like this:
You can just take out the huge spring and drill through the AR, glue it in, and put on a barrel.
If you just cut off the front, you will screw something up.
But, If you cut it like this:
You can just take out the huge spring and drill through the AR, glue it in, and put on a barrel.
Timothy M-Lick <3
#6
Kid Flash
-
- Members
- 1,985 posts
Member
Posted 11 April 2008 - 08:34 PM
i dont plan on cutting anything... ill try opening it up. I just got it today and when i saw the boomstick it looked like it would be hard to put back together.Nope. You have to open it up to do it.
If you just cut off the front, you will screw something up.
But, If you cut it like this:
You can just take out the huge spring and drill through the AR, glue it in, and put on a barrel.
edit: what do you mean glue it in? take out the spring that pushes the red peice forward? and drill through the red peice? so i dont have to open it?
Edited by Kid Flash, 11 April 2008 - 08:35 PM.
#7
keef
-
- Members
- 1,390 posts
Member
Posted 11 April 2008 - 09:01 PM
Well, Just open it up.
It will look way better, and but be harder to mod.
PM me or Badger if you need help.
Its a pain in the ass to put back together.
It will look way better, and but be harder to mod.
PM me or Badger if you need help.
Its a pain in the ass to put back together.
Timothy M-Lick <3
#8
Kid Flash
-
- Members
- 1,985 posts
Member
Posted 11 April 2008 - 10:48 PM
Thanks. Ill do that.Well, Just open it up.
It will look way better, and but be harder to mod.
PM me or Badger if you need help.
Its a pain in the ass to put back together.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
