Well, I just got the Buzzbee Big Blast.
And like I do with about any gun, I first looked to make a simple mod at first and then move onto more difficult mods. I haven't seen a write-up on this, but I think a few people have done it.
EDIT: As the below replies show, this has been done before and I apologize for posting the idea again.
Stuff you need:
Big Blast
Screwdriver
Hacksaw or other implement of destruction
To start off with, open up the gun. You will need to pry off the front orange piece with a flathead screwdriver. Other than that, it's pretty simple.
Then take out the pump/tank/barrel unit.
At the end of the barrel there are 2 holes and an orange piece. Saw off the barrel, right behind the holes.
Screw it back up, and you are done. How easy was that?
I left the orange piece on because I like to keep my guns halfway legal.
The barrel has a slightly larger diameter than medium walled PETG, but fires stefans pretty well.
Range is 55' flat, with a stefan. Also note that the over pressure release valve has not been plugged. It can still shoot the stock missile, about 35-40 ft.
I plan on replacing the barrel and doing other work, but this mod is for the inexperienced modder, or for one that has few materials and tools.
-StephenColbert
Edited by StephenColbert, 09 April 2008 - 08:27 PM.