9 replies to this topic

[Kid Flash]

So after i totally destroyed the tureet... I was wondering if it was worth it to single it... It looks as if a 2k would integrate nicely too. Any other suggestions? Everything works except the turret.

[Flantre]

So after i totally destroyed the tureet... I was wondering if it was worth it to single it... It looks as if a 2k would integrate nicely too. Any other suggestions? Everything works except the turret.

Got any pics of the turrent? Prehaps you could repair it. If there is no chance of repairing I would just single it.

Edited by Flantre, 04 April 2008 - 07:25 PM.

[NerfMonkey]

Mine was decent with a Crayola and light darts. The pin in the cocking slide also bent so I put a loop of string on there to cock it like a normal springer.

I'd guess it hit about 45-50', and it was pretty accurate, so it's worth singling it if you play in smallish areas. Do the typical internal mods too.

[Kid Flash]

Mine was decent with a Crayola and light darts. The pin in the cocking slide also bent so I put a loop of string on there to cock it like a normal springer.

I'd guess it hit about 45-50', and it was pretty accurate, so it's worth singling it if you play in smallish areas. Do the typical internal mods too.

Alright. Im working on it now... Integrating a 2k with the turret too.

Flantre its hopeless... I cut it in thirds... Well really it was more like i cut 6/9ths of it off and then cut another 2/9ths of it off. Its just hopeless.

[OfAllTheNerf]

I'd go ahead and just single it. If you really screwed it up then you might as well do SOMETHING to it.

Why integrate a 2k though? Why not save it for use in a functional primary?

Whatever.

-OfAll'

[Kid Flash]

I'd go ahead and just single it. If you really screwed it up then you might as well do SOMETHING to it.

Why integrate a 2k though? Why not save it for use in a functional primary?

Whatever.

-OfAll'

I dont reallt have any good primaries to integrate it into... My small collection of thirty or so guns doesnt consist of many primaries. Most of the good ones already have stuff in them or have no room.

I have another question now... How do i make it so the at2k fires with a keyring? I mean like what material should i use for the extension of the firing pin...

[ChiliPepperFender]

For extending the firing pin and adding a key ring, I have used fishing wire. Although, I think others have used string also.

[Kid Flash]

For extending the firing pin and adding a key ring, I have used fishing wire. Although, I think others have used string also.

Fishing wire? Do you mean the little wire that you put on the end of the fishing line and attach the hook to?

[Green-Buckshot]

I'll hopefully be writing my singled Tek-10 write up tomorrow.

[ChiliPepperFender]

For extending the firing pin and adding a key ring, I have used fishing wire. Although, I think others have used string also.

Fishing wire? Do you mean the little wire that you put on the end of the fishing line and attach the hook to?

No, I'm not sure even if that would work. The kind I got mine from was something like this. http://images.google...htt...l=en&sa=N
They have wire strong enough to hold up to 60lbs.

Edit: I may have read the site wrong, but I'm not sure.

Edited by ChiliPepperFender, 04 April 2008 - 10:18 PM.