13 replies to this topic

[villain07]

O.K., I was just looking at KBarker's spidey DTG integration. I know that LBBs are cheap and that I can get them and the Spidey DTG at Walmart, but I had a BBB lying around ready to be modded and posted. But I thought about having more than a single shot (not good in wars). Also my NF broke, so I have no sidearms. So if I got the spidey DTG set, is it possible to integrate it to the BBB like KBarker did with his LBB? Please help me out, I'm trying to move up in the ranks from newb to a guy who knows what he's doing.

Edited by villain07, 28 March 2008 - 10:30 PM.

[CaptainSlug]

So if I got the spidey DTG set, is it possible to integrate it to the BBB like KBarker did with his LBB?

No, it's so utterly impossible that he didn't actual accomplish it.

Of course it's possible. All you have to do is replace the stock pump of the SDTG with a check valve and a tubing link to the tank of the air powered weapon you are integrating it into.

Edited by CaptainSlug, 28 March 2008 - 10:25 PM.

[villain07]

Thank you Captain Slug for liking the idea and I will try to make this work and post it as soon as I am done.

Edited by villain07, 28 March 2008 - 10:30 PM.

[OfAllTheNerf]

Um, I don't really know what you were trying to say, but, you should try putting your signature in your signature via the Control Panel.

[villain07]

To clear things up for you, I'm trying to do KBarker's LBB mod, the one with the Spidey DTG set, but with a BBB instead.

[ChiliPepperFender]

Yes, it's possible and as Captain Slug said to connect the two pump valves. Although, I'm not sure if you should plug the pump on either, just incase one gun over pumps and goes boom. But please correct me if I'm wrong someone.

[villain07]

I understand what you're saying but I'm willing to take the risk.

[Quilan Fett]

It is possible, but what you might not realize is that you can't fit it into the BBB's case.

Your idea is just like this, right?

Also, I wouldn't plug the pump because I think I remember readin that the spidey DTG's have very fragile valves.

Oh, and ChiliPepperFender, the BBB is a spring gun. How can you over pump it?

Edited by Qui'lan Fett, 28 March 2008 - 11:02 PM.

[ChiliPepperFender]

It is possible, but what you might not realize is that you can't fit it into the BBB's case.

Your idea is just like this, right?

Also, I wouldn't plug the pump because I think I remember readin that the spidey DTG's have very fragile valves.

Oh, and ChiliPepperFender, the BBB is a spring gun. How can you over pump it?

Yeah, when I read it I thought I saw LBB rather than BBB. My bad, thanks for pointing it out though.

[umdlancer]

Might he mean the Buzzbee Big Blast? That's typically abbreviated as BBBB to avoid confusion with the Big Bad Bow.

[villain07]

O.K. guys, I was thinking about how I could make this mod work because I realized that there wasn't enough room to put the tanks and barrels inside. So I think I have another idea to make this work. I'll put the tanks on the upper part of the outside shell. The barrels can go to the sides below the tanks. I'll attach the pumps to the bottom too. But I'll also go with the original idea I had, B00m13's bbb super clip mod. When I get this done, it'll be one bad looking machine that packs a punch.

[Quilan Fett]

Okay, it's a BBB not a BBBB.

[Uterly]

Since this is combining a spring gun and an air gun I don't know what the question is here. He can't connect the air tanks since only one uses an air tank so therefore he can just connect one to another physically by using tape, glue, or bolts.

[keef]

Look in the mod thread. Look at my last post there. Its totally for you. I'm integrating a SMDTB/ Hornet on my BBB. I just need 3 mores Barbs, I wiped out True Value.

I'll help you make one if you'd like.