What size reducer do I need for a one inch pvc to a half inch cpvc?
Or is there somthing else.
Its for my homemade.Its my wannabe snap 1.
What Reducer Do I Need?
Started by
um6kay
, Mar 28 2008 04:20 PM
12 replies to this topic
#3
um6kay
-
- Banned
- 16 posts
Member
Posted 28 March 2008 - 04:26 PM
I don't believe they make reducers/couplers that connect CPVC to PVC and vice versa.
So is there a pvc that half inch stefans fit in?
#4
DTReaper
-
- Members
- 309 posts
Member
Posted 28 March 2008 - 04:30 PM
1/2 inch CPVC couplers fit almost perfectly into 1/2 PVC couplers so that is how I get them to combine. Im may just need a bit of sanding but they do fit. If worst comes to worst you can always hammer some CPVC into PVC.
-DTR
-DTR
QUOTE(VACC @ Dec 5 2008, 12:09 AM) 
That's it. I'm done. I'm sorry there are breasts on the Internet.
#5
CaptainSlug
-
- Administrators
- 4,763 posts
Resident Mad Scientist
Posted 28 March 2008 - 04:30 PM
1/2 SCH80 pipe fits most Stefans aside from the really skinny ones that some people make.I don't believe they make reducers/couplers that connect CPVC to PVC and vice versa.
So is there a pvc that half inch stefans fit in?
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?
#6
um6kay
-
- Banned
- 16 posts
Member
Posted 28 March 2008 - 04:36 PM
1/2 inch CPVC couplers fit almost perfectly into 1/2 PVC couplers so that is how I get them to combine. Im may just need a bit of sanding but they do fit. If worst comes to worst you can always hammer some CPVC into PVC.
-DTR
Thanks.
#7
Retiate
-
- Members
- 778 posts
Member
Posted 28 March 2008 - 04:39 PM
Also, both PETG and brass best inside 1/2" Sch. 40 PVC. Those will most likely be your best barrel material.
#8
um6kay
-
- Banned
- 16 posts
Member
Posted 28 March 2008 - 04:44 PM
Also, both PETG and brass best inside 1/2" Sch. 40 PVC. Those will most likely be your best barrel material.
I can't get that stuff.
I need a fitting that reduces it down it half inch
#9
Quilan Fett
-
- Members
- 678 posts
Member
Posted 28 March 2008 - 04:51 PM
Either but a 1" to 1/2" reducing coupler and hammar a 1/2" CPVC couler into the 1/2" end or buy a 1" coupler and put a 1" to 1/2" reducing bushing in one end with the CPVC coupler in it. But arent you using 1.25" if you're making a SNAP?
SNAP Shotgun
This guy can see the future!
hasbro in a nerf war!!!!! dude the will cancel it and confinscate are guns
This guy can see the future!
QUOTE(pokemaster @ Mar 3 2009, 04:18 PM)
hasbro in a nerf war!!!!! dude the will cancel it and confinscate are guns
#10
um6kay
-
- Banned
- 16 posts
Member
Posted 28 March 2008 - 05:11 PM
Also, both PETG and brass best inside 1/2" Sch. 40 PVC. Those will most likely be your best barrel material.
How much does that cost?
#11
Dayko
-
- Members
- 1,037 posts
Member
Posted 28 March 2008 - 07:34 PM
Also, both PETG and brass best inside 1/2" Sch. 40 PVC. Those will most likely be your best barrel material.
How much does that cost?
PETG you can buy from OMC for .50 a foot. Brass is like I think 3.00 bucks a foot. SCH 40 PVC is ( for me here in WA ) about 1.50 for ten feet.
< One foot in death...The other in life. >
#12
tyrant bb
-
- Members
- 52 posts
Member
Posted 29 March 2008 - 12:11 AM
Actually at Lowe's, I'm pretty sure I saw a 1/2" PVC to 1/2" CPVC coupler. Maybe it was 3/4" to 1/2" CPVC, but it looked like the right size.
So if it really was what I thought it was, you could use a 1" x 1/2" PVC reducer bushing, 1" coupler, 1/2" PVC, and then the 1/2" PVC x 1/2" CPVC coupler.
So if it really was what I thought it was, you could use a 1" x 1/2" PVC reducer bushing, 1" coupler, 1/2" PVC, and then the 1/2" PVC x 1/2" CPVC coupler.
QUOTE
Palm beach is in florida you dingaling face.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
