4 replies to this topic

[venom213]

My RF20 isn't releasing the air right. It is pretty much the same problem seen in this video.

[Philote]

Normally, someone would have already diddled you for not searching, however upon searching myself i found nothing. ON TOPIC: Perhaps there's a problem with the bladder? Have you opened it up yet? Check that and then see what happens.

PS: Air guns and I have a history and I tend not to mess with them, but good luck

Edited by Philote, 27 March 2008 - 04:41 PM.

[venom213]

Okay, I think I can find a way to fix it in the other threads. I didn't do anything to the bladder. All I did was replace the barrels with CPVC, which wouldn't cause a problem like this.

Edit:I opened it up and I found that I am having the same problem as this guy. I couldn't find a definate way to fix it. Some one mentioned glueing the O-ring back into place, but I dont know how to get inside the whole plunger assembly to do so.

Edited by venom213, 27 March 2008 - 06:53 PM.

[MoonMaster]

I used to have this problem too. To fix it, you have to make sure that the piston is in the exact right place, and that little wing piece must be exact too.

[venom213]

Well, an O-ring actually came out of the piston part, and it works like its brand new. It is really weird. I will see if it is just temporary, but I have no idea what happened.

Edited by venom213, 28 March 2008 - 02:50 PM.