4 replies to this topic

[nerfboi]

Ok first of all, hey everyone.
My BBB won't shoot sometimes. I'll pull it back and fire, but it will sound like a dry fire, and the dart hasn't left yet. I have to check the seal by Clogging the coupler with my thumb and firing it again, then it works. I'm fine with that, but I want to know the answer to this problem. I modded my BBB with a coupler, but like Joey's BBs. Look at it and you'll know what i mean, just that I don't have the white AR in it piece.

[keef]

Thats the problem. Put the white piece in. PM if you need one.

[nerfboi]

But I modded it so it wouldn't need hte White piece. Its like this: I modded it the barrel it far back enough that it would act as a plunger stop(like what joey or who ever did and followed FA's tip fill it up with more hot glue and mode the barrel bakc more to eliminate the AR

[OfAllTheNerf]

Okay, but does it actually shoot anything the times that it "dry fires"? If not then you might not have put the plunger chamber far enough front. It has two little ridges, both of which need to be infront of the wall that's close to it.

If it does shoot, then it might just be your darts are too big for the barrel (they would have to be REALLY big though), are they really tight?

[nerfboi]

Actually, they are a perfect fit with my kind of CPVC. When I fire it, it sometimes won't fire, but When I TEST the seal, the plunger will go back to its position fast, then I'll test it again, then it will go back slowly