9 replies to this topic

[Squilt]

Could that have any potenial...

Like you would twist the bottom twisty thing and the darts would advance up into the barrel...

I also think it might need a breech of some sort

Edited by Squilt, 20 March 2008 - 10:48 PM.

[ChiliPepperFender]

It could have potential but it may take a while to spin the wheel to advance the dart.
By the way, deoderent is actually spelled deodorant.

[Retiate]

If you're gonna take the time to spin the little wheel, you might as well just have a breech without any clip attached. You would get the same reload time, maybe even a little bit faster depending on how good you are at loading it. Plus it would be more reliable than the clip.

[Forsaken angel24]

Cool idea. It would take way too long to spin it by hand.
I am sure there is a way to rig it up to a a small motor that spins it to a certain height each time it is activated.
It would take some electronics but would be really cool to see if it worked.

Edited by Forsaken_angel24, 20 March 2008 - 10:51 PM.

[saxynerfer]

I tried something like this with my first deoderant magazine (clip is entirely different)
The only problem I had was when the magazine is fully loaded, there is a plastic threaded rod pokeing out, so I ended up using the traditional box spring idea.

[Squilt]

Hmmm I guess...

I wonder if i could basicly make a homemade longshot clip out of it.

I got all these cool ideas but dont know how to make 'em or show 'em.

[Quilan Fett]

If you look at the link in my sig, you will see what I'm talking about. I used something similar to this, but I removet the screwey thing. How is this similar, you might ask. I kept the pusher eice and put a 9v battery over it to push the darts down. Works great. But, it is top-fed.

[Squilt]

Ok

[el swifto]

Or, like the longshot clip, you could add a spring instead.



Also, another deoderant clip

[camo]

that won't work as is because most deodorant containers have the plastic threaded rod going to the top and the platform travels up and down it. The darts need to be where the rod is, so you have to take it out. If you have a solid deodorant, you can see it by turning it down, and the rod will become visible. I'm eventually going to stick a spring to the platform, as others have said, and have it just like a longshot clip.

Is it bad that I typed "That's what she said" over 3 times while writing that post?