Ok. So I modded my lil' bro's LS, I added a 1st gen NF spring and took out the AR-nothing special-. It seems like I did somethin' wrong. When I pull back the plunger and the breech goes back and I put in the mag, the two prong-like things on top catch the breech. What did I do? Sorry, no pics, kind'a lazy right now with all this homework and projects.
10 replies to this topic
#1
Oro
-
- Members
- 93 posts
Member
Posted 17 March 2008 - 11:10 PM
QUOTE(deaddumpster @ Jun 25 2008, 04:59 AM) 
Don't pry.......and gently pry it off with a flathead screwdriver.
#2
raw shrimp
-
- Members
- 160 posts
Member
Posted 17 March 2008 - 11:15 PM
I think that same thing happened to me. when you took out the ARs did you cut open the breech?
Edited by raw shrimp, 17 March 2008 - 11:16 PM.
#3
Oro
-
- Members
- 93 posts
Member
Posted 17 March 2008 - 11:22 PM
No, I just hammered the ARs with a screwdriver and wrench. I'm a 13 yr old boy with little money and resources, so I don't think I would try to open the breech.
QUOTE(deaddumpster @ Jun 25 2008, 04:59 AM)
Don't pry.......and gently pry it off with a flathead screwdriver.
#4
el swifto
-
- Members
- 102 posts
Member
Posted 17 March 2008 - 11:23 PM
This happens when you add another spring. The bolt is pushed foward by the extra spring. You fix this by sanding down the back of the dart-catch things.
There have been many threads on this before. Next time, search.
There have been many threads on this before. Next time, search.
#6
StephenColbert
-
- Members
- 45 posts
Member
Posted 17 March 2008 - 11:26 PM
I had the same problem. I found that I had not put the sled on exactly right and had to fiddle with it for a while.
Write me in for President!
Colbert 08'
Colbert 08'
#7
OfAllTheNerf
-
- Members
- 714 posts
Member
Posted 18 March 2008 - 03:11 AM
I had that problem, but it had nothing to do with it being pushed forward due to the spring. The problem was that on the plunger head and the end of the plunge rod there are grooves that line up. I didn't put them back in line with each other so the botl was not being allowed to extend far enough, and not allowing the clip to enter.
It might have had something to do with the added spring too, but when I fixed my previously stated problem it worked perfectly.
It might have had something to do with the added spring too, but when I fixed my previously stated problem it worked perfectly.
#8
mystefansdontflystraight
-
- Members
- 1,176 posts
Member
Posted 18 March 2008 - 06:36 AM
Since I am lazy, I shaved down the back of the 2 pronged clips down. Works fine now.
QUOTE(Blacksunshine @ Dec 24 2009, 02:15 PM)
QUOTE(white moonlight @ Dec 23 2009, 01:29 PM)
It's just screaming to be rearloading...
I seen a movie about that once.
#9
xNFx 37
-
- Members
- 455 posts
Member
Posted 18 March 2008 - 07:31 PM
CaptainSLug mentioned this at least twice in the pinned LS thread. Here it is.
QUOTE
it also has a cock on it
-Chief
#10
Oro
-
- Members
- 93 posts
Member
Posted 18 March 2008 - 11:38 PM
Thank you xNFx 37. Thanks for the input guys. I'll open the gun again during Easter vacation, if I can 
QUOTE(deaddumpster @ Jun 25 2008, 04:59 AM)
Don't pry.......and gently pry it off with a flathead screwdriver.
#11
AJAQ
-
- Members
- 312 posts
Member
Posted 19 March 2008 - 12:02 AM
Thank you xNFx 37. Thanks for the input guys. I'll open the gun again during Easter vacation, if I can
Yeah, the sled/plunger piece isn't in square.
~AJAQ~
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
