5 replies to this topic

[Renegademilitia15]

Well, I bought a double shot around christmas time, and it was working perfectly until about 2 months ago when i was having a very small indoor war, I was cocking it and the cord that pulls the spring back, broke.

I put it down for a while thinking I was screwed. Last week I was thinking that it might be possible to re-tie the cord or replace it with some wire to make it work again.



Dont have any photos right now but will get right on it.



Any help, instructions, or notifications that I'm screwed are welcome.


thanks.

[Trevor]

You could try using a long metal screw (one that goes all the way through the width of the double shot) and just loop the string around it and put the gun back together.

[nerfsharpie6]

You could try using a long metal screw (one that goes all the way through the width of the double shot) and just loop the string around it and put the gun back together.

Have you even seen a double shot? I mean seriously.
Renegademilitia: If you take the gun apart you might be able to tie a new cord on there. I suggest getting some military grade paracord. It comes in 25 foot bundles and does just about anything you want it to. Just be careful with the double shot though, it sucks and the plunger rod tends to snap after prolonged use with no reinforcements.
EDIT: Oh by the way wrong section, it would probably be better to have it in modification section.

Edited by nerfsharpie6, 14 March 2008 - 10:34 PM.

[Trevor]

You could try using a long metal screw (one that goes all the way through the width of the double shot) and just loop the string around it and put the gun back together.

Have you even seen a double shot? I mean seriously.

I own 3, and they've all broken. maybe you just didn't understand what I've said.

[nerfsharpie6]

No I understood, but his problem isn't with the plastic beam.... yet anyway. Its with the rope cord to cock it with, he says it snapped when he went to cock it. Not the whole plastic beam. I had a double shot and this is what happened, I just didn't know how to fix it at the time.

[Renegademilitia15]

Thanks guys, I got what I needed. I'll close the topic now.

edit: I can't close topics.....

Edited by Renegademilitia15, 30 March 2009 - 02:14 PM.