edit: alrighty... etape problem is pretty much fixed. still need the pump number though.
Edited by Kid Flash, 09 March 2008 - 05:00 PM.
Posted 09 March 2008 - 03:56 PM
Edited by Kid Flash, 09 March 2008 - 05:00 PM.
Posted 09 March 2008 - 06:14 PM
Posted 09 March 2008 - 07:52 PM
Posted 11 March 2008 - 02:00 PM
Posted 11 March 2008 - 02:02 PM
i decided not to do it because of the cutting... i dont really have anything GOOD to seal it with... the most i could do is hotglue and etape.Ahh, and do be careful. I made the mistake (the first time I plugged a BS pump) of plugging ALL of the holes in the plunger. It effectively turned it in to a syringe instead of a pump. *sigh* Then I had to cut the back end apart again.
Posted 11 March 2008 - 02:13 PM
Posted 11 March 2008 - 09:16 PM
There's nothing you need to seal. If you cut the pump tube close to the opening, you just need to hotglue the OPV and then put it back together. The BS is sufficiently strong though that you don't need to plug the pump.i decided not to do it because of the cutting... i dont really have anything GOOD to seal it with... the most i could do is hotglue and etape.Ahh, and do be careful. I made the mistake (the first time I plugged a BS pump) of plugging ALL of the holes in the plunger. It effectively turned it in to a syringe instead of a pump. *sigh* Then I had to cut the back end apart again.
0 members, 1 guests, 0 anonymous users