3 replies to this topic

[BendyStraw]

Well, now I know why people hate the Maverick so much. It has been nothing but a pain in the butt ever since I started to mod it.
I've removed the air restrictors, and oddly, one of the barrels doesn't fire the dart more than three feet. I've looked at my drilling job and all the air restrictors are done exactly the same, so I don't think that's the problem. Has anyone ever encountered this?

And now, after firing it a few times, the metal rod in the slider just broke out of the little hole in the gray plastic where it fits in. The slider bar won't stay in the gray plastic cocking bar anymore, preventing a good pullback. I considered using hot glue to get it back into place, but I wanted to ask nerfhaven if this has happened before to them, and what they were able to do about it.

Cruddy mavericks

Edited by BendyStraw, 02 March 2008 - 02:56 PM.

[Kenpachi Taicho]

For your broken slider look here:
http://nerfhaven.com...wtopic=8946&hl=
or
http://nerfhaven.com...wtopic=8867&hl=

As for the barrel problem, you might want to see if the air is escaping somewhere. Considering that air is getting into the barrel (because the dart is exiting the barrel), I bet the air is escaping.

[xNFx 37]

Your dart firing problem could be your AR's are not on the circular thing correctly. You need to push it on as hard as possible, and screw it as tight as possible.

[Ro-Sham-Bo]

This happened to my Maverick. I'm in the process of solving it by cutting down everything on the little yellow circle and then gluing in pvc barrels inside the regular turret.