The spring I added to my LS is pretty hefty to say the least. Most of the time it wont stay cocked because the catch spring is too weak. Can I replace the catch spring, if so where is it on the LS?
~l337
2 replies to this topic
#1
l337n3rf3r
-
- Members
- 154 posts
Member
Posted 22 February 2008 - 06:14 PM
Wii would like to play with you.
#2
sputnik
-
- Members
- 911 posts
Member
Posted 22 February 2008 - 06:17 PM
It is the last piece on the right side of the open ls.
It is an orange plate with a spring on the top part.
It is an orange plate with a spring on the top part.
tcambre on IRC.
<3
<3
#3
Kalentar13
-
- Members
- 35 posts
Member
Posted 22 February 2008 - 07:17 PM
There are some situations where the catch plate can fail with an oversized spring. Not to say that yours is gigantic, but I did have a catch plate fail on a LS once because the plastic was flawed. Find a new catch spring, and if you're feeling confident in modding, graft some metal plate to yours, but that's totally optional.
The Three Shall Spread Their Blackened Wings and Be the Vengeful Striking Hammer of God.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
