10 replies to this topic

[Thomas]

Curious as to how it is done, and having had one and not be able to modify it, I was wondering if anyone had a writeup they were willing to make. I don't want to destroy my Secret Shot, and I certainly don't want anyone else to, so if someone could tell me how to appropriately cut the tubing and such, it would be appreciated.

[General Cole]

The green Tri-Barrel handgun? I'll work on a writeup if that is what you are talking about.

[Thomas]

It has two barrels, but potentially could have 3. If that's what YOU meant, then yes, and thanks.

[General Cole]

Cool. I'll post it when I have the chance.

[frost vectron]

I remember this from back in the day. I've been meaning to re-do my mod and write something decent about it. Unfortunately I haven't been able to get my hands on a new secret shot, nor have I had time to rebuild my original Tri-barrel SS1.

Click if you dare. http://www.frostvect...et_shot_mod.htm

[xNFx 37]

There is a writeup for a double barrel mod on I THINK, Yakman's nerfworld. Unfortuneately, his website is not working.

[Cannonball]

I believe mayhem had one too. I have a ss lying around that is just crayola'd I may try and do a tri-barrel since I have nothing better to do as well.

[Thomas]

I tried the tri-barrel, and I'm having some trouble. If I posted a picture of how my barrels are, and the hollowing of the shell, could someone tell me if it would be hard/impossible to align my barrels correctly?
Thanks in advance.

Hack job;


Barrels:

Edited by Thomas, 21 February 2008 - 02:59 PM.

[frost vectron]

It appears that you cut out the bracketing for the orange triangle piece. You will probably have to smear goop all over one end of triangle bracket then put it into place, making sure that it aligns with the front of your plunger chamber. Then you will probably have to clamp it down somehow and remove the plunger chamber so it won't push it out of place.

Difficult, yes. Impossible, no.

EDIT: I just checked the timestamps on my original photos from this mod. I did this before 2001! That's a crazy fucking long time ago.

Edited by frost vectron, 21 February 2008 - 11:54 PM.

[Thomas]

Thanks!
I accidentally tried to hotglue the barrels into place originally, so I'll have to dremel a very fine place for it to rest in, because when I align the plunger to the barrels, the barrels are a tad too high.
Would anyone happen to know if an Ace 49 spring would fit in this plunger tube? If not, and someone has a replacement spring that fits and and would be willing to part with it, please PM me!
Again, thanks for the help Frost!

[frost vectron]

No problem. This thread makes me want to go and rebuild my SS1. It's the first nerf gun I've laid my hands on. Thanks for the nostalgia!

Edited by frost vectron, 22 February 2008 - 10:30 PM.