4 replies to this topic

[nerfalchemist]

First cut down your LBB and plug the pump.



Then cut the barrel down like so and plug the cracks between the two sides of the shell with hot glue.



Next take a maverick turret, disassemble it and take the bottom off. Then proceed to plug up were the screws are and were the metal rod was with hot glue.



Then stuff the area between the barrels full of FBR or the foam from stock darts



and smother it with hot glue.



Finally insert and hot glue the turret into the LBB.



After all that it should look something like this.



Ranges with stock darts are approximately 20-30 feet.

Questions, comments, flames?

[PointBlank]

Thats a really cool idea, nice write up.

[sputnik]

Its a good mod, and an interesting idea, but alot of range is wasted by the dead space.
On the positive side, that son of a bitch would clear a hallway like no other.

[Jedijoe9]

It's a good idea and it looks pretty damn cool, but like sputnik said, there is so much dead space in the design that a ton of power is wasted.

I wonder if there would be a way to use elbows, couplings, etc to direct the air straight to the mav turret. Maybe something like this, but with the CPVC going through the turret instead of how Z-man12 did it.

[nerfalchemist]

Here is a quick firing video. The door is about 25 feet away from the camera.