Materials needed:
about 3 inches of 1/2' pvc
dremel
9 volt battery
electric tape
epoxy or other adhesive( i used hot glue)
First, take apart your tommy 20 and remove the motor assembly. Now take your 1/2' pvc and cut it the same as in the diagram. Clean up your cut a bit, and glue the sucker in the middle of your T20 wheels. (make sure that the don't contact the pvc!) Now tape your battery o the pvc, and attach the wires and a switch or something else if you want, I chose to do it simpler. you could put a coupler on it and attach a hopper ish thing to it, but i choose to keep it like this.
and please hold as I get the actually picture of the tiny thing.
here we go...
Edited by SorrowX, 01 January 2009 - 12:35 AM.