I take no credit for the idea of making the reactor shoot darts. So, at my freinds house, (rex-techs[There? Happy? I mentioned your name. That means you, Tyler.]) So, we took it apart, and noticed a couple of ARs. Just do the usual stuff, but for the new barrel nub/housing, use a part of a airzone tek-ten. Use the part in the middle of the rotating barrel, the useless part that looks like a ninja star and is fun to chuck at a persons face (heh heh...). Sand out the middle untill a marker (or any barrel) will fit inside. Hot glue that in there, make a good seal.
Here is a pic of the front.
Then, fit that onto the o-ring part at the end of the reactor, and make another good seal. Then you are done. We had some leak problems, so use a lot of hot glue. Once again so i don't get flamed, I take no credit for the idea of making the reactor shoot darts. Ranges really depend on your darts, how hard you pump, and your barrel. I don't recomend crayolas for this mod.
Here are some finished pics.
Whoa, my hand looks weird in that pic...mabe it's because his brother crashed me into ever snowdrift he found on the tobbogan behind the quad...
Edited by sn1per, 11 February 2008 - 01:20 PM.
QUOTE(Scotch @ Feb 3 2008, 05:47 PM)
sn1per I appreciate your humor, that made me laugh literally out loud.
"It's a free country, UNDER MY DICTATORSHIP!!!"
-Connor