ok, I'm gonna make a loser using a super soaker with the air restrictor cut off and a pvc barrel
what size pvc goes with what size darts?
any other suggestions?
2 replies to this topic
#2
Jangadance
-
- Members
- 676 posts
Member
Posted 07 November 2003 - 04:23 AM
1/2" PVC with Nerf Micros. Check out cxwq's mod 401- Barrels and Darts. If you want to use homemade Stefan micros, I would suggest Schedule 80 1/2" PVC instead of the regular Schedule 40 white PVC. Sch. 80 1/2" PVC is better than CPVC (which looks tan) because it has a larger Inner Diameter, or "I.D."
Most importantly, go see what barrel materials you have available to you, and how they fit YOUR darts. Good luck with the mod. If you really want to impress anyone here, I suggest experimenting with some other mods than just a barrel replacement and nozzle enlargement.
Most importantly, go see what barrel materials you have available to you, and how they fit YOUR darts. Good luck with the mod. If you really want to impress anyone here, I suggest experimenting with some other mods than just a barrel replacement and nozzle enlargement.
"The 'dance goes on..."
#3
Sorax
-
- Members
- 9 posts
Member
Posted 08 November 2003 - 06:09 PM
I'm not out to impress anyone at the moment 
I'm just after a good loser, because it seems to me that the current nerf selection for losing is really lame
I may try to impress you later
I'm just after a good loser, because it seems to me that the current nerf selection for losing is really lameI may try to impress you later
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
