4 replies to this topic

[Woodsman nerfer]

I need help putting the Recon back together. Can someone please list the steps for putting the internals back together?

[Dayko]

Just make sure that the bolt sled is in the hole on the gray sliding piece and that the metal stick coming from the
black piece is lined up with the other part of the casing.

[Woodsman nerfer]

I tried that but I can't get the big spring at the back to stay in the case while I line up the rest of the case.

[hoshiadam]

I tried that but I can't get the big spring at the back to stay in the case while I line up the rest of the case.

Place the spring so it is still around the plunger, but about half way out of the case. Then after you get the case together (before putting the black cap on), screw the spring all the way into the case. Might need pliers (or some other tool) to turn the spring in the final turn.

hoshiadam

Edited by hoshiadam, 04 February 2008 - 02:46 PM.

[Woodsman nerfer]

It worked, thanks for the help.