I'm doing an Angel Breach, but I need an FBR that fits 9/16ths brass nicely. I have this thin fbr that barely falls to the bottom of 9/16ths, but with tightening fings it's OK.
ANyways, gimme some suggestions,
PS:I don't have red FBR either.
8 replies to this topic
#1
xNFx 37
-
- Members
- 455 posts
Member
Posted 26 January 2008 - 06:19 PM
QUOTE
it also has a cock on it
-Chief
#2
PharaonArin
-
- Members
- 79 posts
Member
Posted 26 January 2008 - 07:46 PM
Usually you buy your barrels around what FBR you use. Thats how i do mine.
#3
Flaming Hilt
-
- Members
- 1,070 posts
Member
Posted 26 January 2008 - 09:34 PM
I use Frost King's 1/2", at Home Depot. If they don't have it where you live, then Pharao is right, you should have bought your FBR first. Sorry bud.
" Beneath this mask there is more than flesh, Mr. Creedy. Beneath this mask there is an idea...
...and ideas are bulletproof. "
...and ideas are bulletproof. "
V
#4
xNFx 37
-
- Members
- 455 posts
Member
Posted 26 January 2008 - 09:36 PM
No, I have 3 different types of FBR, including Frost King, but it blows royal ass. I tried to ram rod it down my barrel and it ripped it off.
I would buy Angel's but he ran out.
Although mod man on ebay has like 500 ft. for sale...
I would buy Angel's but he ran out.
Although mod man on ebay has like 500 ft. for sale...
QUOTE
it also has a cock on it
-Chief
#5
tyrant bb
-
- Members
- 52 posts
Member
Posted 27 January 2008 - 12:04 AM
I actually just did an angel breech. If your foam fits 17/32" brass good, then just shrink all the sizes of brass by 1 size. It works. Unless... well the breech has a hard time getting the darts into the gun from the magazine but I don't see how having bigger foam would help that.
QUOTE
Palm beach is in florida you dingaling face.
#6
NerfRifleman
-
- Members
- 25 posts
Member
Posted 27 January 2008 - 02:33 PM
ive used 1/2 inch frost king for my angel breech and it fits 17/32 quite nicely. just go to the hobby store or wherever you go to get brass, bring a Stefan, and size the brass to the dart.
#7
xNFx 37
-
- Members
- 455 posts
Member
Posted 27 January 2008 - 04:02 PM
NerfRifleman, on Jan 27 2008, 02:33 PM, said:
ive used 1/2 inch frost king for my angel breech and it fits 17/32 quite nicely. just go to the hobby store or wherever you go to get brass, bring a Stefan, and size the brass to the dart.
I'm talking about the longshot, so I can't switch brass sizes.
QUOTE
it also has a cock on it
-Chief
#8
Peter
-
- Members
- 146 posts
Member
Posted 27 January 2008 - 04:23 PM
xNFx 37, on Jan 27 2008, 03:02 PM, said:
NerfRifleman, on Jan 27 2008, 02:33 PM, said:
ive used 1/2 inch frost king for my angel breech and it fits 17/32 quite nicely. just go to the hobby store or wherever you go to get brass, bring a Stefan, and size the brass to the dart.
I'm talking about the longshot, so I can't switch brass sizes.
Have you ever tried any method of size adjustment?
I.E: Pillow Case + Dryer, stretching the foam?
Frost King (the darker gray) fits like a charm in 9/16, you just have to stretch it.
igitur qui desiderat pacem praeparet bellum
#9
xNFx 37
-
- Members
- 455 posts
Member
Posted 27 January 2008 - 10:10 PM
I did, but I need red FBR, because it fits good in the tightening rings. Mine fit a little thinner in the tightening rings.
Does anybody know if ModMAns Red FBR is the same as ANgels?
Does anybody know if ModMAns Red FBR is the same as ANgels?
QUOTE
it also has a cock on it
-Chief
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
