Jump to content


Photo

Hole In The Handla


11 replies to this topic

#1 sn1per

sn1per

    Member

  • Banned
  • 249 posts

Posted 20 January 2008 - 08:46 PM

So, i got a recon today. Yay me. After some close examining, i noticed a small hole and some knobs and stuff in the bottom of the handle. Does every recon have this hole? If so, hasbro is probably making some other attachment that goes into the handle. it may be an ammo holder, but i doubt that because of the clip.
QUOTE(Scotch @ Feb 3 2008, 05:47 PM) View Post

sn1per I appreciate your humor, that made me laugh literally out loud.

"It's a free country, UNDER MY DICTATORSHIP!!!"
-Connor

#2 TAiLsChaser

TAiLsChaser

    Member

  • Members
  • 145 posts

Posted 20 January 2008 - 08:53 PM

That's most likely just like all the other holes on the other guns. Like the firefly, LS and mave, they all have holes somewhere so you can hang cord or what have you. Ammos not too out of the question. The 10 and 30 packs of extra darts have a clip on there so you can hang it and refill your clips and barrels.
  • 0
"Every mod I do is original. I'm a true modder; not a mod re-performer."

"It’s only after you’ve made the mistake and taken the wrong path, do you see all the other options that were before you."

#3 keef

keef

    Member

  • Members
  • 1,390 posts

Posted 20 January 2008 - 08:54 PM

Mine does. Manuel says its a dart holder.
  • 0
Timothy M-Lick <3

#4 sn1per

sn1per

    Member

  • Banned
  • 249 posts

Posted 20 January 2008 - 08:59 PM

Mine does. Manuel says its a dart holder.

Cool. Thanks.
EDIT:
That's most likely just like all the other holes on the other guns. Like the firefly, LS and mave, they all have holes somewhere so you can hang cord or what have you. Ammos not too out of the question. The 10 and 30 packs of extra darts have a clip on there so you can hang it and refill your clips and barrels.
I was talking about the one beneath the handle, but question answered.

Edited by sn1per, 20 January 2008 - 09:06 PM.

QUOTE(Scotch @ Feb 3 2008, 05:47 PM) View Post

sn1per I appreciate your humor, that made me laugh literally out loud.

"It's a free country, UNDER MY DICTATORSHIP!!!"
-Connor

#5 MavericK96

MavericK96

    Member

  • Members
  • 229 posts

Posted 21 January 2008 - 12:38 AM

It's actually sort of silly having a hole for one dart when you consider the way the gun works. I guess it's for some sort of last-chance holdout shot or something.
  • 0

#6 TAiLsChaser

TAiLsChaser

    Member

  • Members
  • 145 posts

Posted 21 January 2008 - 02:06 AM

It doesn't hold just the "one" dart. It holds the bag with the darts in it via the clip on the bag.

Edited by TAiLsChaser, 21 January 2008 - 02:06 AM.

  • 0
"Every mod I do is original. I'm a true modder; not a mod re-performer."

"It’s only after you’ve made the mistake and taken the wrong path, do you see all the other options that were before you."

#7 zaphodB

zaphodB

    Member

  • Members
  • 369 posts

Posted 21 January 2008 - 09:41 AM

No, you're thinking of the loop. There's also a hole in the bottom of the handle that holds one dart, similar to the way that the battery holders in the nightfinder hold two. Streamlines don't even come in a bag with a clip, just taggers do.

Edited by zaphodB, 21 January 2008 - 09:41 AM.

  • 0
Alice came to the fork in the road.
"Which road do I take?" she asked.
"Where do you want to go?" responded the Cheshire cat.
"I don't know," Alice answered.
"Then," said the cat, "it doesn't matter."

#8 xNFx 37

xNFx 37

    Member

  • Members
  • 455 posts

Posted 21 January 2008 - 10:32 AM

Well, the hole I think, is for the LS problem. You have to shoot one bullet, for it to not be cocked if you want it to have a ll 12 darts. (hard to explain).

Anyway, with this hole, you can have your clip fully loaded, but when you shoot you can put the dart in the handle.

This is good because it takes streest off of the plastic that holds the spring.


I know that sounded confusing.
  • 0
QUOTE
it also has a cock on it


-Chief

#9 LiterSize

LiterSize

    Member

  • Members
  • 295 posts

Posted 22 January 2008 - 11:35 AM

I never thought about the LS problem, but I imagined the hole also took into account anyone that used the LS front pistol in combination with the Recon.
  • 0

#10 friendly nerfer

friendly nerfer

    Member

  • Members
  • 44 posts

Posted 22 January 2008 - 03:38 PM

Well, the hole I think, is for the LS problem. You have to shoot one bullet, for it to not be cocked if you want it to have a ll 12 darts. (hard to explain).


So basically you mean put 6 darts in the clip, cock the weapon, release the mag and replace the top round so you have a round in the chamber and the maximum capacity of ammo you can in the magazines?
  • 0
The point of war is not to die for your country, it's to make the other poor bastard die for his!

#11 sn1per

sn1per

    Member

  • Banned
  • 249 posts

Posted 22 January 2008 - 03:44 PM

Well, the hole I think, is for the LS problem. You have to shoot one bullet, for it to not be cocked if you want it to have a ll 12 darts. (hard to explain).

Anyway, with this hole, you can have your clip fully loaded, but when you shoot you can put the dart in the handle.

This is good because it takes streest off of the plastic that holds the spring.


I know that sounded confusing.

I know what you mean. Open bolt, put clip in, close bolt. But what if you don't want it cocked? I never leave my guns cocked, unless i am shooting them. The clips go in both with the bolt closed if you push a little harder.
QUOTE(Scotch @ Feb 3 2008, 05:47 PM) View Post

sn1per I appreciate your humor, that made me laugh literally out loud.

"It's a free country, UNDER MY DICTATORSHIP!!!"
-Connor

#12 bobafett109

bobafett109

    Member

  • Members
  • 115 posts

Posted 22 January 2008 - 04:06 PM

Also, the magazenes can hole 7 darts. Put it in normally, cock it, fire 1, so you have 6 in the clip and it's not cocked.
  • 0
QUOTE(Carbon @ Feb 17 2008, 10:17 PM) View Post

QUOTE(FoamSniper @ Feb 18 2008, 12:08 AM) View Post

You're probably all wondering how to get a range of 95' from a mech 20

I was figuring you threw it.


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users