Okay, so I just need to know if there is such thing as something that attahes two pieces of 1/4" vinyl tubing. Kindof like a coupler.
I mostly need it for pumps and such, when you want to relocate it (Titan).
Thanks,
-OfAll'
3 replies to this topic
#2
Posted 20 January 2008 - 04:35 PM
Yeah, it's called a barbed coupler.
SNAP Shotgun
This guy can see the future!
hasbro in a nerf war!!!!! dude the will cancel it and confinscate are guns
This guy can see the future!
hasbro in a nerf war!!!!! dude the will cancel it and confinscate are guns
#3
Posted 20 January 2008 - 05:08 PM
The tubing in the Titan isn't a fractional size, however with barbed tube fittings you only need to be fairly close in order to get the tubing onto the fitting. 3/16" barbed fittings should work.
I used metric size ones to make the Volley Titan attachment
<- Mcmaster part# 2429K37
http://nerfhaven.com...wtopic=8471&hl=
I used metric size ones to make the Volley Titan attachment
<- Mcmaster part# 2429K37
http://nerfhaven.com...wtopic=8471&hl=
Edited by CaptainSlug, 20 January 2008 - 05:09 PM.
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?
#4
Posted 22 January 2008 - 01:12 PM
Thanks, CS. I knew I had seen something like it before, but couldn't place it.
The information will be put to good use!
EDIT: Do you need to use any sort of sealing adhesive while applying these things? Or just an adhesive to keep it together?
The information will be put to good use!
EDIT: Do you need to use any sort of sealing adhesive while applying these things? Or just an adhesive to keep it together?
Edited by OfAllTheNerf, 22 January 2008 - 04:42 PM.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users