![Posted Image](http://i2.photobucket.com/albums/y25/Kelsygrey/P1000784.jpg)
It works by pulling the rip cord and this will rotate the forward barrel and there is a piston it flicks which propels the dart.
As said, it was broken, and I noticed I had a completely useless Ball Blaster. What to do?
So a little industrial adhesive and some hot glue to fill in the cracks and you get
![Posted Image](http://i2.photobucket.com/albums/y25/Kelsygrey/P1000781.jpg)
![Posted Image](http://i2.photobucket.com/albums/y25/Kelsygrey/P1000782.jpg)
The Unfriendly Handshake.
It is the ultimate CQB gun since the range is 4 effective feet (or for you Canadians, little under 1.5 m) but it fires 3 darts consistently.
I drilled out the air restrictors, but for those looking to do this, do not get rid of them all, only because the cylinder is completely hollow and the only way to get a streamline airflow is to have some sort of post.
I know, not the best of work, but for a 10 minute job I think it could be worse.
Questions, comments, compliments?