im making another singled titan barrel but does anyone know the ideal length?
Ideal Titan Barrel Length?
Started by joeyaglr444, Dec 24 2007 07:21 PM
9 replies to this topic
#1
joeyaglr444
-
- Members
- 377 posts
Member
Posted 24 December 2007 - 07:21 PM
Boys Become Men....Men Become Wolves
Blaffair to Rememblack.
Blaffair to Rememblack.
#2
southpaw
-
- Members
- 143 posts
Member
Posted 24 December 2007 - 07:36 PM
Be more specific. Depends on the barrel material, thickness of darts, weights etc.
Edited by southpaw, 24 December 2007 - 07:37 PM.
Sup?
#3
Forsaken angel24
-
- Contributors
- 2,472 posts
Member
Posted 24 December 2007 - 07:47 PM
I personally prefer 2 feet. You still get very good range but now with killer accuracy.
I don't get my kicks out of you,
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.
#4
Dayko
-
- Members
- 1,037 posts
Member
Posted 24 December 2007 - 07:52 PM
I prefer my 12" PETG barrel. I get some pretty good range with 12 inches. 165' with out the pump plugged.
< One foot in death...The other in life. >
#5
Guest_CornMan_*
Guest_CornMan_*
-
- Guests
Posted 24 December 2007 - 08:01 PM
I get about 120 with a 12'' barrel. But keep in mind, I cannot twist off my barrel, (got it off ebay, and it was probably one of the first made. One that was made in '04.) so I cannot get the last air restirctor out. But for dead on accuracy, I have heard (from angel) that 2 feet for losing. he he he. 
#6
watkins
-
- Members
- 68 posts
Member
Posted 24 December 2007 - 09:28 PM
Mines 23 inches of CPVC from right where the inner AR was. I can get well over 150 feet with streamlines with glue filled heads.
#7
Omega
-
- Members
- 287 posts
Member
Posted 24 December 2007 - 09:47 PM
2 feet, by my mark. You don't sacrifice much range- maybe ten feet, and that's nothing considering the gun's accuracy limit- and the accuracy is greatly increased. POW.
QUOTE(Vishamon)
My rule is that those wearing a thong are considered to be invisible to other players.
#8
rokor
-
- Members
- 792 posts
Member
Posted 24 December 2007 - 10:19 PM
yah, just like everyone else I would say go for two feet of CPVC. With my crazy modded titan I get well over 200 feet with almost dead on accuracy.
"Sorry rokor...my cousin is gay too...it's okay...we're tolerant"
Talio in Shoutbox.
Talio in Shoutbox.
#9
keef
-
- Members
- 1,390 posts
Member
Posted 25 December 2007 - 12:39 AM
I get 140+ w/ BB streamlines on a 12 inch CPVC breech. Its accuracy is very good too.
Timothy M-Lick <3
#10
lego101
-
- Members
- 5 posts
Member
Posted 25 December 2007 - 07:38 PM
2 feet 1/2" CPVC, with a 20" piece of 1/2" PVC duct taped/hot glued to the bottom with 2" on each end. If you make a scilencer(sp?) like FA24's, and a bipod and relocate the pump to where the Hornet goes, then plug it, you have an insanely accurate "douche bag" rifle. With insane ranges too.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
