All you need for this mod is a barrel that can move around a bit and a regular rubber band.
- Do a normal mod:Ar's, spring replacement, ect. When you do the barrel replacement, make sure you have a relatively thin wall so the barrel can move around.
- OK, get a rubber band. Start on the bottom of the barrel with it strait. Pull up and cross it. Now, pull it back towards the cocking handle, and set it down. make sure it isn't secures ON the cocking handle, because it may through of accuracy. Here is a rough idea of what it should look
- Now, if you did this right, the barrel will be angled. Adjust the rubber bands down so that it is perfectly strait. It should look like this:
Range comparison:
Normal flat: 53, 50, 55 Normal angled: 60,63,68
Hop up flat:49, 53, 53 Hop up angled:59(bad dart?), 65, 60
Overall, it is a simple mod that if used correctly, can be extremely effective. I tested it in a war and it is extremely effective. After some practice, i can change in about 1 second. I found it to be most effective if someone is trying to run away, or providing covering fire for your rapid fire guys.
Edited by ultra920, 09 December 2007 - 12:01 PM.