6 replies to this topic

[OfAllTheNerf]

Okay, so I'm in the process of a write-up, and I need to know what length the barrels should be on an at2k turret that will soon be on a nitefinder.

I'm thinking around 3", because there's more space between the dart and the plunger chamber when the turret is on... Anyone have any facts/suggestions?

Thank you, and if it could be found by searching, I'm very sorry.

-OfAll'

[bpso86]

That should be plenty long enough. My brother uses 3-4" cpvc barrels on his nf, without a turret, and they get great range and accuracy. I dont think you need anything longer.

What material are you using by the way?

[OfAllTheNerf]

That should be plenty long enough. My brother uses 3-4" cpvc barrels on his nf, without a turret, and they get great range and accuracy. I dont think you need anything longer.

What material are you using by the way?

Yeah, I know that 4" is common for NF's (I use it on all my single's), but I was just wondering if 3" was too much...

Oh yeah, I'm using CPVC.

[Blasphemy]

Are you replacing the spring or just using the stock one? If you replace it 4"-5" should do, if you don't plan on replacing it 3" should do.

Edited by Blasphemy, 01 December 2007 - 09:42 AM.

[murakumo32]

Are you sure you searched?

I think I used 3.5" and got a satisfactory 65' or so. The increased space is pretty negligible.

[OfAllTheNerf]

Are you sure you searched?

I think I used 3.5" and got a satisfactory 65' or so. The increased space is pretty negligible.

I did come across something in the modification/PJ thread, but when you click on it from the search list (atleast for me), it puts you at the beginning.

Anyways, thanks.

[murakumo32]

No problem. If you don't find it anywhere but in the Mods & PJ thread, then it probably doesn't have a write-up.